Konferensbidrag

Konferensbidrag

[2]
A. ,. V. Frolovskaia et al., "Experience of light thin-walled structures improvement in construction," i 6TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND CONTROL ENGINEERING (ICMCE 2017), 2018.
[3]
E. Ghafoori Roozbahany, M. Partl och A. Guarin, "Influence of layer thickness on the flow of asphalt under simulated compaction," i Bearing Capacity of Roads, Railways and Airfields - Proceedings of the 10th International Conference on the Bearing Capacity of Roads, Railways and Airfields, BCRRA 2017, 2018, s. 1435-1441.
[4]
M. Partl, "Introduction," i RILEM State-of-the-Art Reports, 2018, s. 1-14.
[5]
A. Ansell, E. Nordström och A. Guarin, "Laboratory investigation of steel fibre reinforced sprayed concrete using a computed tomography method," i Eight International Symposium on SPRAYED CONCRETE - Modern Use of Wet Mix Sprayed Concrete for Underground Support, 2018, s. 24-38.
[6]
T. Vieira och U. Sandberg, "Negative Texture, Positive for the Environment: Results of Horizontal Grinding of Asphalt Pavements," i Transportation Research Board Annual Meeting 2018, 2018.
[7]
T. Vieira och U. Sandberg, "Acoustical performance of winter tyres on two in-service road surfaces: a frequency spectrum analysis and comparison," i Proceedings of the Inter-Noise 2017, 2017, s. 6825-6836.
[8]
A. Ansell, L. Ahmed och A. Guarin, "Computed tomography as investigation method for steel fibre reinforced tunnel shotcrete," i XXIII Symposium on Nordic Concrete Research & Development, Aalborg, 2017, s. 63-66.
[9]
S. Toller och M. Larsson, "Implementation of life cycle thinking in planning and procurement at the swedish transport administration," i Pavement Life-Cycle Assessment - Proceedings of the Pavement Life-cycle Assessment Symposium, 2017, 2017, s. 281-287.
[10]
A. Bekele et al., "Slow dynamic diagnosis of asphalt concrete specimen to determine level of damage caused by static low temperature conditioning," i 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation, 2017.
[11]
J. Lundberg et al., "Texture influence on road dust load," i Proceedings of the 22nd International Transportation and Air Pollution Conferens, 2017.
[12]
K. Lillqvist et al., "The influence of thermal modification on veneer bond strength," i 13th Meeting of the Northern European Network for Wood Science and Engineering - WSE, 2017.
[13]
A. Falk och M. Wålinder, "Function and design of innovative bio-based products for the building sector," i Structures and Architecture - Proceedings of the 3rd International Conference on Structures and Architecture, ICSA 2016, 2016, s. 93-101.
[14]
P. Das, B. Birgisson och D. Jelagin, "Importance of Thermal Contraction Coefficient in Low Temperature Cracking of Asphalt Concrete," i Proceedings of the Fifty-Ninth Annual Conference of the Canadian Technical Asphalt Association (CTAA): Winnipeg, Manitoba, 2016.
[15]
I. Onifade och B. Birgisson, "Investigation of Energy-Based Crack Initiation Threshold from Meso-Scale Asphalt Concrete Response," i 8th RILEM International Conference on Mechanisms of Cracking and Debonding in Pavements, 2016, s. 679-685.
[16]
T. Yideti, D. Jelagin och B. Birgisson, "Moisture Distribution Model to Predict Matric Suction in Unbound Granular Materials as a Function of Fines Content," i TRB 95th Annual Meeting Compendium of Papers, 2016.
[17]
U. Sandberg et al., "Noise and Rolling Resistance Properties of Various Types of Winter Tyres Compared to Normal Car Tyres," i Proceedings of the Inter-Noise 2016, 2016, s. 1737-1746.
[20]
K. Laine et al., "Acetylation and densification of wood," i 11th Meeting of the Northern European Network for Wood Science and Engineering – WSE. 14.-15.9.2015, Poznan, Poland, 2015.
[21]
K. Laine et al., "Hardness, set-recovery and micromorphology studies of densified and thermally modified wood," i The 8th European Conference of Wood Modification. 26.-27.10.2015, Helsinki, Finland., 2015.
[22]
L. Linkosalmi, K. Laine och L. Rautkari, "Life cycle impacts of modified wood products," i COST action FP1407 1st conference “Life Cycle Assessment, EPDs and modified wood”. 25.-26.8.2015, Koper, Slovenia, 2015.
[23]
S. Källbom et al., "Surface chemical analysis and water vapour sorpion of thermally modified wood exposed to increased relative humidity," i The Eighth European Conference on Wood Modification (ECWM8) 2015, 2015.
[24]
S. Källbom et al., "Surface energy characteristics of refined fibres at different pressures," i Proceedings of 10th Meeting of the Northern European Network for Wood Science & Engineering (WSE 2014), 2014, s. 134-138.
[25]
S. Källbom et al., "Surface energy characterization of thermally modified wood particles exposed to humidity cycling using inverse gas chromatography," i The Seventh European Conference on Wood Modification (ECWM7)., 2014.
[26]
P. Khavassefat, D. Jelagin och B. Birgisson, "The effect of road surface deterioration on pavement service life," i Expanding horizons: 13th International Symposium on Heavy Vehicle Transport Technology, San Luis, Argentina, 27-31 October 2014, 2014.
[27]
S. Källbom et al., "Water vapour sorption properties and surface chemical analysis of thermally modified wood particles," i Recent Advances in the field of TH and THM Wood Treatment, 2014.
[28]
A. Falk, "Cross-laminated timber : Driving forces and innovation," i Structures and Architecture: Concepts, Applications and Challenges - Proceedings of the 2nd International Conference on Structures and Architecture, ICSA 2013, 2013, s. 511-518.
[29]
E. Chailleux och M. N. Partl, "General summary and outlook," i RILEM State-of-the-Art Reports, 2013, s. 429-438.
[30]
K. Segerholm och R. E. Ibach, "Moisture and Fungal Durability of Wood-Plastic Composites Made With Chemically Modified and Treated Wood Flour," i Proceedings IRG Annual Meeting, 2013, s. IRG/WP 13-40648.
[31]
S. Källbom et al., "Physico-chemical characterization of THM modified wood using inverse gas chromatography (IGC)," i Evaluation, processing and prediction of THM treated wood behaviour by experimental and numerical methods, 2013, s. 35-36.
[32]
S. Källbom et al., "Surface energy characterization at different moisture levels of thermally modified wood using inverse gas chromatography," i Proceedings of the 9th meeting of the Northern European Network for Wood Science and Engineering (WSE), 2013, s. 130-135.
[33]
S. Källbom et al., "Surface energy characterization of thermally modified wood using inverse gas chromatography," i The 44th Annual Meeting of the International Research Group on Wood Preservation, 2013.
[34]
K. Segerholm et al., "Biological outdoor durability of WPC with chemically modified wood," i Proceedings of the 6th European conference on wood modification, 2012, s. 47-54.
[35]
D. Jones et al., "Development of a novel wood based panel for use in internal door manufacture," i Proceedings of the 5th International Conference on Environmentally-Compatible Forest Products, 2012.
[36]
K. Segerholm och M. Wålinder, "Inverse gas chromatography characterization of wood composite components," i Proceedings of the 8th meeting of the Northern European Network for Wood Science and Engineering (WSE), 2012, s. 58-63.
[37]
K. Segerholm, R. E. Ibach och M. Westin, "Durability of PLA - Modified Wood Composites," i Proceedings of the 11th International Conference on Wood & Biofiber Plastic Composites, 2011.
[38]
J. Jermer et al., "Durability testing of coconut shell according to ENV 807," i 42nd Annual Meeting of the International Research Group on Wood Protection, 2011.
[39]
E. Sidorova, S. Trey och F. Englund, "Modification of wood with an anti-oxidant tannin derivative : preliminary study," i Proceedings of the 7th meeting of the Nordic-Baltic Network in Wood Material Science & Engineering (WSE) 2011, 2011, s. 161-166.
[40]
K. Segerholm, M. Wålinder och S. L. Bardage, "Mould growth resistance of fungicide-containing WPC," i Proceedings of the 7th meeting of the Nordic-Baltic Network in Wood Material Science & Engineering (WSE), 2011, s. 25-30.
[41]
M. E. P. Wålinder och D. Gardner, "Surface energy characteristics of maple wood particles coated with polystyrene-acrylic acid (PSAA) block copolymer," i Proceedings of the 2011 IAWS Annual Meeting on Novel Materials from Wood or Cellulose, 2011, s. 66-67.
[42]
S. Olsson et al., "The use of esterified lignin for synthesis of durable composites," i Proceedings of the 7th meeting of the Nordic-Baltic Network in Wood Material Science and Engineering (WSE), 2011, s. 173-178.
[43]
K. Segerholm, M. Wålinder och D. Holmberg, "Adhesion studies of scots pine-polypropylene bond using ABES," i In Proceedings of the 6th meeting of the Nordic-Baltic Network in Wood Material Science and Engineering, WSE, 2010.
[44]
K. Segerholm och M. Wålinder, "Dimensional changes due to water sorption in high wood-content WPCs prepared with modified wood," i In Proceedings of the fifth European Conference on Wood Modification, ECWM5, 2010.
[45]
M. Wålinder, K. Segerholm och M. Westin, "Durability of high wood content WPCs," i Proceedings of the International Convention of Society of Wood Science and Technology andUnited Nations Economic Commission for Europe – Timber Committee, 2010.
[46]
M. Wålinder et al., "Liquids and coatings wettability and penetrability of acetylated scots pine sapwood," i In Proceedings of the fifth European Conference on Wood Modification, ECWM5, 2010, s. 381-388.
[47]
E. Sidorova och T. Morén, "The Behaviour of Heat Treated Wooden Cladding Exposed to Extreme Climate Changes," i Proceedings of the 6th meeting of the Nordic-Baltic Network In Wood Material Science And Engineering (WSE), 2010, s. 147-154.
[48]
K. Segerholm, A. Omidvar och M. Wålinder, "Acetylation to Minimize Water Uptake and Deformation of High Wood Content WPC," i The Fourth European Conference on Wood Modification, 2009, s. 239-242.
[50]
M. Wålinder et al., "Micromorphology Studies of Modified Wood Using a Surface Preparation Technique Based on UV-Laser Ablation," i The Fourth European Conference on Wood Modification, 2009, s. 103-110.
Fullständig lista i KTH:s publikationsportal
Innehållsansvarig:webmaster@byv.kth.se
Tillhör: Institutionen för byggvetenskap
Senast ändrad: 2017-09-21