Tidskrifter

Tidskrifter

[1]
E. Olsson och D. Jelagin, "A contact model for the normal force between viscoelastic particles in discrete element simulations," Powder Technology, vol. 342, s. 985-991, 2019.
[2]
T. Vieira, U. Sandberg och S. Erlingsson, "Acoustical performance of winter tyres on in-service road surfaces," Applied Acoustics, vol. 153, s. 30-47, 2019.
[3]
E. Olsson, D. Jelagin och P. A. Forquin, "Computational framework for analysis of contact-induced damage in brittle rocks," International Journal of Solids and Structures, 2019.
[4]
F. Chen, D. Jelagin och M. Partl, "Experimental and numerical analysis of asphalt flow in a slump test," International Journal on Road Materials and Pavement Design, vol. 20, s. S446-S461, 2019.
[5]
E. Ghafoori Roozbahany och M. Partl, "Investigation of asphalt joint compaction using discrete element simulation," International Journal on Road Materials and Pavement Design, 2019.
[6]
G. Sun et al., "Low temperature self-healing character of asphalt mixtures under different fatigue damage degrees," Construction and Building Materials, vol. 223, s. 870-882, 2019.
[7]
H. Fadil et al., "Measurement of the viscoelastic properties of asphalt mortar and its components with indentation tests," International Journal on Road Materials and Pavement Design, 2019.
[8]
E. Ghafoori Roozbahany, M. Partl och D. Elaguine, "Modelling the flow of asphalt under simulated compaction using discrete element," Construction and Building Materials, vol. 227, 2019.
[9]
T. Vieira, U. Sandberg och S. Erlingsson, "Negative texture, positive for the environment : effects of horizontal grinding of asphalt pavements," International Journal on Road Materials and Pavement Design, s. 1-22, 2019.
[10]
E. Olsson, D. Jelagin och M. Partl, "New discrete element framework for modelling asphalt compaction," International Journal on Road Materials and Pavement Design, 2019.
[11]
N. Francart et al., "Requirements set by Swedish municipalities to promote construction with low climate change impact," Journal of Cleaner Production, vol. 208, s. 117-131, 2019.
[12]
D. Penaloza et al., "The influence of system boundaries and baseline in climate impact assessment of forest products," The International Journal of Life Cycle Assessment, vol. 24, no. 1, s. 160-176, 2019.
[14]
K. Lillqvist et al., "Water vapour sorption properties of thermally modified and pressurised hot-water-extracted wood powder," Holzforschung, vol. 73, no. 12, s. 1059-1068, 2019.
[15]
J. Lundberg et al., "Wet Dust Sampler-a Sampling Method for Road Dust Quantification and Analyses," Water, Air and Soil Pollution, vol. 230, no. 8, 2019.
[16]
D. Peñaloza, M. Erlandsson och A. Pousette, "Climate impacts from road bridges : effects of introducing concrete carbonation and biogenic carbon storage in wood," Structure and Infrastructure Engineering, vol. 14, no. 1, s. 56-67, 2018.
[17]
E. Jeoffroy et al., "Iron-based particles for the magnetically-triggered crack healing of bituminous materials," Construction and Building Materials, vol. 164, s. 775-782, 2018.
[18]
T. Sjökvist, M. E.P. Wålinder och A. Blom, "Liquid sorption characterisation of Norway spruce heartwood and sapwood using a muiticycle Wilhelmy plate method," International Wood Products Journal, vol. 9, no. 2, s. 58-65, 2018.
[19]
S. Källbom, M. S. Moghaddam och M. E. P. Wålinder, "Liquid sorption, swelling and surface energy properties of unmodified and thermally modified Scots pine heartwood after extraction," Holzforschung, vol. 72, no. 3, s. 251-258, 2018.
[20]
D. Jelagin et al., "Mechanical Characterization of Granite Rock Materials : On the Influence from Pre-Existing Defects," Journal of Testing and Evaluation, vol. 46, no. 2, s. 540-548, 2018.
[21]
S. Källbom et al., "Sorption and surface energy properties of thermally modified spruce wood components," Wood and Fiber Science, vol. 50, no. 3, s. 346-357, 2018.
[22]
M. Larsson, M. Wålinder och A. Falk, "Teleodynamic timber façades," Frontiers in Built Environment, vol. 4, 2018.
[23]
M. Partl, "Towards improved testing of modern asphalt pavements," Materials and Structures, vol. 51, no. 6, 2018.
[24]
B. W. Hailesilassie et al., "A closer scientific look at foam bitumen," Road Materials and Pavement Design, vol. 18, no. 2, s. 362-375, 2017.
[26]
C. Celma Cervera et al., "Contact-induced deformation and damage of rocks used in pavement materials," Materials & design, vol. 133, s. 255-265, 2017.
[27]
I. Onifade och B. Birgisson, "Damage and fracture characterization of asphalt concrete mixtures using the equivalent micro-crack stress approach," Construction and Building Materials, vol. 148, s. 521-530, 2017.
[28]
M. Partl, "Editorial," International Journal on Road Materials and Pavement Design, vol. 18, s. 1-1, 2017.
[30]
M. Namutebi et al., "Exploratory study on bitumen content determination for foamed bitumen mixes based on porosity and indirect tensile strength," International journal of traffic and transportation engineering, vol. 4, no. 2, s. 131-144, 2017.
[31]
I. Onifade, Y. H. Dinegdae och B. Birgisson, "Hierarchical approach for fatigue cracking performance evaluation in asphalt pavements," Frontiers of Structural and Civil Engineering, vol. 11, no. 3, s. 257-269, 2017.
[32]
M. Arm et al., "How Does the European Recovery Target for Construction & Demolition Waste Affect Resource Management?," Waste and Biomass Valorization, vol. 8, no. 5, s. 1491-1504, 2017.
[33]
E. Ghafoori Roozbahany, M. Partl och A. Guarin, "Introducing a new method for studying the field compaction," International Journal on Road Materials and Pavement Design, vol. 18, s. 26-38, 2017.
[34]
M. Sedighi Moghaddam et al., "Microstructure of chemically modified wood using X-ray computed tomography in relation to wetting properties," Holzforschung, vol. 71, no. 2, s. 119-128, 2017.
[35]
T. Li et al., "Response of hygroscopicity to heat treatment and its relation to durability of thermally modified wood," Construction and Building Materials, vol. 144, s. 671-676, 2017.
[36]
M. Kymalainen et al., "Surface modification of solid wood by charring," Journal of Materials Science, vol. 52, no. 10, s. 6111-6119, 2017.
[37]
K. Vahtikari et al., "The influence of extractives on the sorption characteristics of Scots pine (Pinus sylvestris L.)," Journal of Materials Science, vol. 52, no. 18, s. 10840-10852, 2017.
[38]
S. Bressi, A. G. Dumont och M. N. Partl, "A new laboratory methodology for optimization of mixture design of asphalt concrete containing reclaimed asphalt pavement material," Materials and Structures, vol. 49, no. 12, s. 4975-4990, 2016.
[39]
E. Ghafoori Roozbahany och M. Partl, "A new test to study the flow of mixtures at early stages of compaction," Materials and Structures, vol. 49, no. 9, s. 3547-3558, 2016.
[40]
S. Bressi, A. G. Dumont och M. Partl, "An advanced methodology for the mix design optimization of hot mix asphalt," Materials & design, vol. 98, s. 174-185, 2016.
[42]
D. Peñaloza, M. Erlandsson och A. Falk, "Exploring the climate impact effects of increased use of bio-based materials in buildings," Construction and Building Materials, vol. 125, s. 219-226, 2016.
[43]
R. de Frias Lopez et al., "Force transmission and soil fabric of binary granular mixtures," Geotechnique, vol. 66, no. 7, s. 578-583, 2016.
[44]
[45]
I. Onifade, R. Balieu och B. Birgisson, "Interpretation of the Superpave IDT strength test using a viscoelastic-damage constitutive model," Mechanics of time-dependant materials, s. 1-19, 2016.
[46]
E. Jeoffroy et al., "Iron oxide nanoparticles for magnetically-triggered healing of bituminous materials," Construction and Building Materials, vol. 112, s. 497-505, 2016.
[47]
M. Tuominen et al., "Superamphiphobic overhang structured coating on a biobased material," Applied Surface Science, vol. 389, s. 135-143, 2016.
[48]
K. Laine et al., "Surface densification of acetylated wood," European Journal of Wood and Wood Products, vol. 74, no. 6, s. 829-835, 2016.
[49]
P. Čermák et al., "The effect of wetting cycles on moisture behaviour of thermally modified Scots pine (Pinus sylvestris L.) wood," Journal of Materials Science, vol. 51, no. 3, s. 1504-1511, 2016.
[50]
Fullständig lista i KTH:s publikationsportal
Innehållsansvarig:webmaster@byv.kth.se
Tillhör: Institutionen för byggvetenskap
Senast ändrad: 2017-09-21