Tidskrifter

Tidskrifter

[1]
M. Stigsson och D. M. Ivars, "A Novel Conceptual Approach to Objectively Determine JRC Using Fractal Dimension and Asperity Distribution of Mapped Fracture Traces," Rock Mechanics and Rock Engineering, vol. 52, no. 4, s. 1041-1054, 2019.
[2]
A. Ghaderi, A. Abbaszadeh Shahri och S. Larsson, "An artificial neural network based model to predict spatial soil type distribution using piezocone penetration test data (CPTu)," Bulletin of Engineering Geology and the Environment, vol. 78, no. 6, s. 4579-4588, 2019.
[3]
A. Prästings, J. Spross och S. Larsson, "Characteristic values of geotechnical parameters in Eurocode 7," Proceedings of the Institution of Civil Engeneers : Geotechnical Engineering, vol. 172, no. 4, s. 301-311, 2019.
[4]
K. R. Massarsch och C. Wersäll, "Monitoring and Process Control of Vibratory Driving," Geotechnical Engineering, vol. 50, no. 3, s. 1-10, 2019.
[5]
H. Bjurström och N. Rydén, "Non-contact rolling surface wave measurements on asphalt concrete," International Journal on Road Materials and Pavement Design, vol. 20, no. 2, s. 334-346, 2019.
[7]
W. Bjureland et al., "Probability distributions of shotcrete parameters for reliability-based analyses of rock tunnel support," Tunnelling and Underground Space Technology, vol. 87, s. 15-26, 2019.
[8]
J. Spross och T. Gasch, "Reliability-based alarm thresholds for structures analysed with the finite element method," Structural Safety, vol. 76, s. 174-183, 2019.
[9]
[10]
J. Spross et al., "Storskalig lagring av vätgas i bergrum," Bygg och Teknik, no. 1, s. 41-44, 2019.
[11]
A. Wonglert et al., "Bearing capacity and failure behaviors of floating stiffened deep cement mixing columns under axial load," Soil and foundation, vol. 58, no. 2, s. 446-461, 2018.
[12]
C. Wersäll, I. Nordfelt och S. Larsson, "Effektivare packning med nya insikter," Bygg & Teknik, no. 1, s. 44-45, 2018.
[13]
P. Davy et al., "Elastic Properties of Fractured Rock Masses With Frictional Properties and Power Law Fracture Size Distributions," Journal of Geophysical Research - Solid Earth, vol. 123, no. 8, s. 6521-6539, 2018.
[14]
A. Abbaszadeh Shahri et al., "Kartering av skredbenägenhet medartificiell intelligens," Bygg & teknik, no. 1, 2018.
[15]
[16]
J. Spross et al., "On the Need for a Risk-Based Framework in Eurocode 7 to Facilitate Design of Underground Openings in Rock," Rock Mechanics and Rock Engineering, vol. 51, no. 8, s. 2427-2431, 2018.
[17]
C. Wersäll, I. Nordfelt och S. Larsson, "Resonant roller compaction of gravel in full-scale tests," Transportation Geotechnics, vol. 14, s. 93-97, 2018.
[18]
J. Spross, L. Olsson och H. Stille, "The Swedish Geotechnical Society's methodology for risk management : a tool for engineers in their everyday work," Georisk : Assessment and Management of Risk for Engineered Systems and Geohazards, vol. 12, no. 3, s. 183-189, 2018.
[19]
L. Zou, U. Håkansson och V. Cvetkovic, "Two-phase cement grout propagation in homogeneous water-saturated rock fractures," International Journal of Rock Mechanics And Mining Sciences, vol. 106, s. 243-249, 2018.
[20]
W. Bjureland et al., "Challenges in applying fixed partial factors to rock engineering design," Geotechnical Special Publication, no. 283, s. 384-393, 2017.
[21]
M. El Tani och H. Stille, "Grout Spread and Injection Period of Silica Solution and Cement Mix in Rock Fractures," Rock Mechanics and Rock Engineering, s. 1-16, 2017.
[22]
A. Prästings et al., "Implementing the Extended Multivariate Approach in Design with Partial Factors for a Retaining Wall in Clay," ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, vol. 3, no. 4, 2017.
[23]
S. Sadrizadeh et al., "Numerical, Experimental and Analytical Studies on Fluid Flow through a Marsh Funnel," Journal of Applied Fluid Mechanics, vol. 10, no. 6, s. 1501-1507, 2017.
[24]
S. Larsson, J. Spross och W. Bjureland, "Obefintlig tillsyn utarmar geoteknisk kompetens hos husbyggare," Bygg & teknik, no. 1, s. 61-63, 2017.
[25]
W. Bjureland et al., "Reliability aspects of rock tunnel design with the observational method," International Journal of Rock Mechanics And Mining Sciences, vol. 98, s. 102-110, 2017.
[26]
F. Deckner et al., "Sheet pile behavior during vibratory driving : numerical study based on a field test," Soil Dynamics and Earthquake Engineering, 2017.
[28]
A. Nejad Ghafar et al., "Varying aperture long slot (VALS), a method for studying grout penetrability into fractured hard rock," ASTM geotechnical testing journal, vol. 40, no. 5, s. 871-882, 2017.
[29]
R. Massarsch och C. Wersäll, "Vibrationspåverkan från tågtrafik på pålgrundlagd byggnad," Bygg & teknik, no. 1, s. 15-20, 2017.
[30]
F. Deckner, K. Viking och S. Hintze, "Wave patterns in the ground : case studies related to vibratory sheet pile driving," Geotechnical and Geological Engineering, 2017.
[31]
J. Spross och F. Johansson, "When is the observational method in geotechnical engineering favourable?," Structural Safety, vol. 66, s. 17-26, 2017.
[32]
A. Nejad Ghafar et al., "An Experimental Approach to the Development of Dynamic Pressure to Improve Grout Spread," Rock Mechanics and Rock Engineering, vol. 49, no. 9, s. 3709-3721, 2016.
[33]
A. A. Shahri, "Assessment and Prediction of Liquefaction Potential Using Different Artificial Neural Network Models : A Case Study," Geotechnical and Geological Engineering, vol. 34, no. 3, s. 807-815, 2016.
[34]
R. Ignat et al., "Behavior of braced excavation supported by panels of deep mixing columns," Canadian geotechnical journal (Print), vol. 53, no. 10, s. 1671-1687, 2016.
[35]
M. Lingwanda et al., "Comparison of geotechnical uncertainties linked to different soil characterization methods," Geomechanics and Geoengineering, s. 1-15, 2016.
[36]
H. Bjurström och N. Rydén, "Detecting the thickness mode frequency in a concrete plate using backward wave propagation," Journal of the Acoustical Society of America, vol. 139, no. 2, s. 649-657, 2016.
[37]
Y. H. Dinegdae och B. Birgisson, "Effects of truck traffic on top-down fatigue cracking performance of flexible pavements using a new mechanics-based analysis framework," International Journal on Road Materials and Pavement Design, 2016.
[39]
H. Bjurström et al., "Field and laboratory stress-wave measurements of asphalt concrete," Construction and Building Materials, vol. 126, s. 508-516, 2016.
[40]
A. Draganović och B. Lagerblad, "Filtration of silica particles from a low-pH cementitious grout," Construction and Building Materials, vol. 105, s. 29-34, 2016.
[41]
R. de Frias Lopez et al., "Force transmission and soil fabric of binary granular mixtures," Geotechnique, vol. 66, no. 7, s. 578-583, 2016.
[42]
J. Spross et al., "Geotekniska risker kan hanteras bättre," Bygg och teknik, vol. 108, no. 1, s. 63-66, 2016.
[43]
A. Krounis et al., "Influence of cohesive strength in probabilstic sliding stability re-assessment of concrete dams," Journal of Geotechnical and Geoenvironmental Engineering, vol. 143, no. 2, 2016.
[44]
F. Johansson, "Influence of scale and matedness on the peak shear strength of fresh, unweathered rock joints," International Journal of Rock Mechanics And Mining Sciences, vol. 82, s. 36-47, 2016.
[45]
A. Palmén et al., "Low-temperature calcite precipitation in sand using CIPS," Ground Improvement, vol. 169, no. 1, s. 36-41, 2016.
[46]
A. Prästings, S. Larsson och R. Müller, "Multivariate approach in reliability-based design of a sheet pile wall," Transportation Geotechnics, vol. 7, s. 1-12, 2016.
[47]
R. Müller, S. Larsson och J. Spross, "Multivariate stability assessment during staged construction," Canadian geotechnical journal (Print), vol. 53, no. 4, s. 603-618, 2016.
[48]
J. Place et al., "On using the thin fluid-layer approach at ultrasonic frequencies for characterising grout propagation in an artificial fracture," International Journal of Rock Mechanics And Mining Sciences, vol. 89, s. 68-74, 2016.
[49]
R. Esmaeilabadi och A. A. Shahri, "PREDICTION OF SITE RESPONSE SPECTRUM UNDER EARTHQUAKE VIBRATION USING AN OPTIMIZED DEVELOPED ARTIFICIAL NEURAL NETWORK MODEL," ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, vol. 10, no. 30, s. 76-83, 2016.
[50]
Y. H. Dinegdae och B. Birgisson, "Reliability-based calibration for a mechanics-based fatigue cracking design procedure," International Journal on Road Materials and Pavement Design, vol. 17, no. 3, s. 529-546, 2016.
Fullständig lista i KTH:s publikationsportal