Journal Articles
Journal Articles
[1]
E. Olsson et al.,
"A numerical framework for modelling settlements of railway ballast layers,"
TRANSPORTATION GEOTECHNICS, vol. 44, 2024.
[2]
A. Shabani, D. Elaguine and M. Partl,
"Advanced testing and characterization of low-temperature cracking in bitumen and mastic,"
Materials and Structures, vol. 57, no. 1, 2024.
[3]
Y. Wang et al.,
"Design of birch plywood as gusset plates in timber-timber uniaxial tension connections : Influence of fastener pattern, face grain orientation, and discussions based on the Whitmore effective width theory,"
Journal of Building Engineering, vol. 86, 2024.
[4]
J. Bergenudd, J.-M. Battini and R. Crocetti,
"Dynamic analysis of a pedestrian timber truss bridge at three construction stages,"
Structures, vol. 59, 2024.
[5]
M. K. Etikan et al.,
"Experimental and numerical analyses of crushing resistance of unbound road materials,"
The international journal of pavement engineering, vol. 25, no. 1, 2024.
[6]
T. Wang et al.,
"Glulam beams adhesively bonded by birch plywood plates in moment-resisting beam-to-beam connections,"
Engineering structures, vol. 302, pp. 117471, 2024.
[7]
S. Ling et al.,
"Predicting the mechanical properties of semi-flexible pavement material with micromechanical modeling,"
Materials & design, vol. 239, 2024.
[8]
S. Pajunen, R. Crocetti and X. Browne,
"Structural Timber System for Medium-to-Long Spans: The HB System Revisited,"
Journal of Architectural Engineering, vol. 30, no. 2, 2024.
[9]
T. Wang et al.,
"Adhesively bonded joints between spruce glulam and birch plywood for structural applications: experimental studies by using different adhesives and pressing methods,"
Wood Material Science & Engineering, vol. 18, no. 3, pp. 1141-1150, 2023.
[10]
Y. Wang et al.,
"Birch plywood as gusset plates in glulam frame via mechanical connectors : A combined experimental and numerical study,"
Journal of Building Engineering, vol. 65, pp. 105744, 2023.
[11]
M. Larsson et al.,
"Condition assessment of cycle path texture and evenness using a bicycle measurement trailer,"
The international journal of pavement engineering, vol. 24, no. 1, 2023.
[12]
D. Saliko, A. Ahmed and S. Erlingsson,
"Development and validation of a pavement temperature profile prediction model in a mechanistic-empirical design framework,"
TRANSPORTATION GEOTECHNICS, vol. 40, pp. 100976, 2023.
[13]
J. Bergenudd et al.,
"Dynamic testing and numerical modelling of a pedestrian timber bridge at different construction stages,"
Engineering structures, vol. 279, 2023.
[14]
Y. Wang et al.,
"Embedment behavior of dowel-type fasteners in birch plywood : Influence of load-to-face grain angle, test set-up, fastener diameter, and acetylation,"
Construction and Building Materials, vol. 384, 2023.
[15]
S. Ling et al.,
"Experimental and numerical analyses on the fracture characteristics of cement-asphalt mastic-aggregate interface,"
Construction and Building Materials, vol. 401, 2023.
[16]
D. Elaguine et al.,
"Experimental and numerical modelling of shear bonding between asphalt layers,"
International Journal on Road Materials and Pavement Design, vol. 24, no. S1, pp. 176-191, 2023.
[17]
Z. Tan et al.,
"Multiscale characterization and modeling of aggregate contact effects on asphalt concrete's tension–compression asymmetry,"
Materials & design, vol. 232, 2023.
[18]
M. A. Afridi, S. Erlingsson and L. Sjogren,
"Municipal street maintenance challenges and management practices in Sweden,"
Frontiers in Built Environment, vol. 9, 2023.
[19]
Y. Yang et al.,
"Numerical analysis of hydroplaning and veer-off risk of dual-tyre on a wet runway,"
The international journal of pavement engineering, vol. 24, no. 1, 2023.
[20]
Z. Tan et al.,
"Numerical modeling of the mechanical response of asphalt concrete in tension and compression,"
Mechanics of materials, vol. 187, 2023.
[21]
H. Yin et al.,
"Susceptibility of surface-modified superhydrophobic wood and acetylated wood to mold and blue stain fungi,"
Progress in organic coatings, vol. 182, 2023.
[22]
Y. Wang et al.,
"Testing and analysis of screw-connected moment joints consisting of glued-laminated timbers and birch plywood plates,"
Engineering structures, vol. 290, 2023.
[23]
Z. Tan et al.,
"Virtual-specimen modeling of aggregate contact effects on asphalt concrete,"
Construction and Building Materials, vol. 400, 2023.
[24]
J. Žigon, M. S. Moghaddam and M. Wålinder,
"Wettability and surface interactions of natural and thermally modified beech wood with water and water-based coatings : the effect of surface pre-treatment type,"
European Journal of Wood and Wood Products, vol. 81, no. 1, pp. 73-88, 2023.
[25]
E. Mattsson et al.,
"A Conceptual Landscape-Level Approach to Assess the Impacts of Forestry on Biodiversity,"
Sustainability, vol. 14, no. 7, 2022.
[26]
S. Ling et al.,
"Damage characterization of pouring semi-flexible pavement material under triaxial compressive load based on X-ray computed tomography,"
Construction and Building Materials, vol. 348, 2022.
[27]
M. Larsson, A. Niska and S. Erlingsson,
"Degradation of Cycle Paths—A Survey in Swedish Municipalities,"
CivilEng, vol. 3, no. 2, pp. 184-210, 2022.
[28]
Y. Anderson-Skold et al.,
"Development of the SUNRA Tool to Improve Regional and Local Sustainability of the Transportation Sector,"
Sustainability, vol. 14, no. 18, pp. 11275, 2022.
[29]
A. Shabani and Gh. H. Hamedi,
"Effect of elastomer polymer on the moisture susceptibility of asphalt concrete,"
MAGAZINE OF CIVIL ENGINEERING, vol. 109, no. 1, 2022.
[30]
D. Saliko and S. Erlingsson,
"Evaluation of the structural response of two in-service thin flexible pavements under heavy vehicle loading during different seasons by built-in sensors,"
The international journal of pavement engineering, pp. 1-18, 2022.
[31]
S. Inozemtcev et al.,
"Experimental and numerical study on SMA modified with an encapsulated polymeric healing agent,"
Materials and Structures, vol. 55, no. 9, 2022.
[32]
Y. Wang et al.,
"Experimental investigation on mechanical properties of acetylated birch plywood and its angle-dependence,"
Construction and Building Materials, vol. 344, pp. 128277, 2022.
[33]
L. Xie et al.,
"Hysteretic Performance of Angle Steel Connections in a Timber-Concrete Composite System,"
BioResources, vol. 17, no. 1, pp. 1270-1284, 2022.
[34]
T. Wang et al.,
"Influence of face grain angle, size, and moisture content on the edgewise bending strength and stiffness of birch plywood,"
Materials & design, vol. 223, pp. 111227, 2022.
[35]
T. Wang et al.,
"In-plane mechanical properties of birch plywood,"
Construction and Building Materials, vol. 340, 2022.
[36]
M. Partl,
"M&S highlight : Isacsson and Lu (1995), Testing and appraisal of polymer modified road bitumens-state of the art,"
Materials and Structures, vol. 55, no. 2, 2022.
[37]
Z. Tan et al.,
"Numerical study of the aggregate contact effect on the complex modulus of asphalt concrete,"
Materials & design, vol. 213, 2022.
[38]
Z. Ma et al.,
"Optimal design of fresh sand fog seal mortar using response surface methodology (RSM) : Towards to its workability and rheological properties,"
Construction and Building Materials, vol. 340, 2022.
[39]
S. Ling et al.,
"Pore characteristics and permeability simulation of porous asphalt mixture in pouring semi-flexible pavement,"
Construction and Building Materials, vol. 330, 2022.
[40]
H. Fadil, D. Elaguine and M. Partl,
"Spherical indentation test for quasi-non-destructive characterisation of asphalt concrete,"
Materials and Structures, vol. 55, no. 3, 2022.
[41]
H. Yin et al.,
"Wettability performance and physicochemical properties of UV exposed superhydrophobized birch wood,"
Applied Surface Science, vol. 584, 2022.
[42]
T. Wang et al.,
"An innovative timber-steel hybrid beam consisting of glulam mechanically reinforced by means of steel rod : Analytical and preliminary numerical investigations,"
Journal of Building Engineering, vol. 43, 2021.
[43]
D. Saliko and S. Erlingsson,
"Damage investigation of thin flexible pavements to Longer Heavier Vehicle loading through instrumented road sections and numerical calculations,"
International Journal on Road Materials and Pavement Design, 2021.
[44]
X. Zhu et al.,
"Effects of surface texture deterioration and wet surface conditions on asphalt runway skid resistance,"
Tribology International, vol. 153, 2021.
[45]
A. Bekele et al.,
"Micro-mechanical modelling of low temperature-induced micro-damage initiation in asphalt concrete based on cohesive zone model,"
Construction and Building Materials, vol. 286, 2021.
[46]
H. Yin et al.,
"Non-fluorine surface modification of acetylated birch for improved water repellence,"
Holzforschung, vol. 75, no. 9, pp. 857-868, 2021.
[47]
Y. Yang et al.,
"Numerical analysis concerning the skid resistance of rubber-contaminated runway grooves,"
Tribology International, vol. 163, 2021.
[48]
H. Fadil, D. Jelagin and M. Partl,
"Predicting the master curves of bituminous mastics with micromechanical modelling,"
International Journal on Road Materials and Pavement Design, 2021.
[49]
T. Vieira, U. Sandberg and S. Erlingsson,
"Rolling Resistance Evaluation of Winter Tires on In-Service Road Surfaces,"
Tire science & technology, vol. 49, no. 2, pp. 78-103, 2021.
[50]
Y. Xiao et al.,
"Special Issue on Silicate Solid Waste Recycling,"
Materials, vol. 14, no. 14, 2021.