Conference Paper

Conference Paper

[2]
A. ,. V. Frolovskaia et al., "Experience of light thin-walled structures improvement in construction," in 6TH INTERNATIONAL CONFERENCE ON MECHATRONICS AND CONTROL ENGINEERING (ICMCE 2017), 2018.
[3]
E. Ghafoori Roozbahany, M. Partl and A. Guarin, "Influence of layer thickness on the flow of asphalt under simulated compaction," in Bearing Capacity of Roads, Railways and Airfields - Proceedings of the 10th International Conference on the Bearing Capacity of Roads, Railways and Airfields, BCRRA 2017, 2018, pp. 1435-1441.
[4]
M. Partl, "Introduction," in RILEM State-of-the-Art Reports, 2018, pp. 1-14.
[5]
A. Ansell, E. Nordström and A. Guarin, "Laboratory investigation of steel fibre reinforced sprayed concrete using a computed tomography method," in Eight International Symposium on SPRAYED CONCRETE - Modern Use of Wet Mix Sprayed Concrete for Underground Support, 2018, pp. 24-38.
[6]
T. Vieira and U. Sandberg, "Negative Texture, Positive for the Environment: Results of Horizontal Grinding of Asphalt Pavements," in Transportation Research Board Annual Meeting 2018, 2018.
[7]
T. Vieira and U. Sandberg, "Acoustical performance of winter tyres on two in-service road surfaces: a frequency spectrum analysis and comparison," in Proceedings of the Inter-Noise 2017, 2017, pp. 6825-6836.
[8]
A. Ansell, L. Ahmed and A. Guarin, "Computed tomography as investigation method for steel fibre reinforced tunnel shotcrete," in XXIII Symposium on Nordic Concrete Research & Development, Aalborg, 2017, pp. 63-66.
[9]
S. Toller and M. Larsson, "Implementation of life cycle thinking in planning and procurement at the swedish transport administration," in Pavement Life-Cycle Assessment - Proceedings of the Pavement Life-cycle Assessment Symposium, 2017, 2017, pp. 281-287.
[10]
A. Bekele et al., "Slow dynamic diagnosis of asphalt concrete specimen to determine level of damage caused by static low temperature conditioning," in 43rd Annual Review of Progress in Quantitative Nondestructive Evaluation, 2017.
[11]
J. Lundberg et al., "Texture influence on road dust load," in Proceedings of the 22nd International Transportation and Air Pollution Conferens, 2017.
[12]
K. Lillqvist et al., "The influence of thermal modification on veneer bond strength," in 13th Meeting of the Northern European Network for Wood Science and Engineering - WSE, 2017.
[13]
A. Falk and M. Wålinder, "Function and design of innovative bio-based products for the building sector," in Structures and Architecture - Proceedings of the 3rd International Conference on Structures and Architecture, ICSA 2016, 2016, pp. 93-101.
[14]
P. Das, B. Birgisson and D. Jelagin, "Importance of Thermal Contraction Coefficient in Low Temperature Cracking of Asphalt Concrete," in Proceedings of the Fifty-Ninth Annual Conference of the Canadian Technical Asphalt Association (CTAA): Winnipeg, Manitoba, 2016.
[15]
I. Onifade and B. Birgisson, "Investigation of Energy-Based Crack Initiation Threshold from Meso-Scale Asphalt Concrete Response," in 8th RILEM International Conference on Mechanisms of Cracking and Debonding in Pavements, 2016, pp. 679-685.
[16]
T. Yideti, D. Jelagin and B. Birgisson, "Moisture Distribution Model to Predict Matric Suction in Unbound Granular Materials as a Function of Fines Content," in TRB 95th Annual Meeting Compendium of Papers, 2016.
[17]
U. Sandberg et al., "Noise and Rolling Resistance Properties of Various Types of Winter Tyres Compared to Normal Car Tyres," in Proceedings of the Inter-Noise 2016, 2016, pp. 1737-1746.
[20]
K. Laine et al., "Acetylation and densification of wood," in 11th Meeting of the Northern European Network for Wood Science and Engineering – WSE. 14.-15.9.2015, Poznan, Poland, 2015.
[21]
K. Laine et al., "Hardness, set-recovery and micromorphology studies of densified and thermally modified wood," in The 8th European Conference of Wood Modification. 26.-27.10.2015, Helsinki, Finland., 2015.
[22]
L. Linkosalmi, K. Laine and L. Rautkari, "Life cycle impacts of modified wood products," in COST action FP1407 1st conference “Life Cycle Assessment, EPDs and modified wood”. 25.-26.8.2015, Koper, Slovenia, 2015.
[23]
S. Källbom et al., "Surface chemical analysis and water vapour sorpion of thermally modified wood exposed to increased relative humidity," in The Eighth European Conference on Wood Modification (ECWM8) 2015, 2015.
[24]
S. Källbom et al., "Surface energy characteristics of refined fibres at different pressures," in Proceedings of 10th Meeting of the Northern European Network for Wood Science & Engineering (WSE 2014), 2014, pp. 134-138.
[25]
S. Källbom et al., "Surface energy characterization of thermally modified wood particles exposed to humidity cycling using inverse gas chromatography," in The Seventh European Conference on Wood Modification (ECWM7)., 2014.
[26]
P. Khavassefat, D. Jelagin and B. Birgisson, "The effect of road surface deterioration on pavement service life," in Expanding horizons: 13th International Symposium on Heavy Vehicle Transport Technology, San Luis, Argentina, 27-31 October 2014, 2014.
[27]
S. Källbom et al., "Water vapour sorption properties and surface chemical analysis of thermally modified wood particles," in Recent Advances in the field of TH and THM Wood Treatment, 2014.
[28]
A. Falk, "Cross-laminated timber : Driving forces and innovation," in Structures and Architecture: Concepts, Applications and Challenges - Proceedings of the 2nd International Conference on Structures and Architecture, ICSA 2013, 2013, pp. 511-518.
[29]
E. Chailleux and M. N. Partl, "General summary and outlook," in RILEM State-of-the-Art Reports, 2013, pp. 429-438.
[30]
K. Segerholm and R. E. Ibach, "Moisture and Fungal Durability of Wood-Plastic Composites Made With Chemically Modified and Treated Wood Flour," in Proceedings IRG Annual Meeting, 2013, p. IRG/WP 13-40648.
[31]
S. Källbom et al., "Physico-chemical characterization of THM modified wood using inverse gas chromatography (IGC)," in Evaluation, processing and prediction of THM treated wood behaviour by experimental and numerical methods, 2013, pp. 35-36.
[32]
S. Källbom et al., "Surface energy characterization at different moisture levels of thermally modified wood using inverse gas chromatography," in Proceedings of the 9th meeting of the Northern European Network for Wood Science and Engineering (WSE), 2013, pp. 130-135.
[33]
S. Källbom et al., "Surface energy characterization of thermally modified wood using inverse gas chromatography," in The 44th Annual Meeting of the International Research Group on Wood Preservation, 2013.
[34]
K. Segerholm et al., "Biological outdoor durability of WPC with chemically modified wood," in Proceedings of the 6th European conference on wood modification, 2012, pp. 47-54.
[35]
D. Jones et al., "Development of a novel wood based panel for use in internal door manufacture," in Proceedings of the 5th International Conference on Environmentally-Compatible Forest Products, 2012.
[36]
K. Segerholm and M. Wålinder, "Inverse gas chromatography characterization of wood composite components," in Proceedings of the 8th meeting of the Northern European Network for Wood Science and Engineering (WSE), 2012, pp. 58-63.
[37]
K. Segerholm, R. E. Ibach and M. Westin, "Durability of PLA - Modified Wood Composites," in Proceedings of the 11th International Conference on Wood & Biofiber Plastic Composites, 2011.
[38]
J. Jermer et al., "Durability testing of coconut shell according to ENV 807," in 42nd Annual Meeting of the International Research Group on Wood Protection, 2011.
[39]
E. Sidorova, S. Trey and F. Englund, "Modification of wood with an anti-oxidant tannin derivative : preliminary study," in Proceedings of the 7th meeting of the Nordic-Baltic Network in Wood Material Science & Engineering (WSE) 2011, 2011, pp. 161-166.
[40]
K. Segerholm, M. Wålinder and S. L. Bardage, "Mould growth resistance of fungicide-containing WPC," in Proceedings of the 7th meeting of the Nordic-Baltic Network in Wood Material Science & Engineering (WSE), 2011, pp. 25-30.
[41]
M. E. P. Wålinder and D. Gardner, "Surface energy characteristics of maple wood particles coated with polystyrene-acrylic acid (PSAA) block copolymer," in Proceedings of the 2011 IAWS Annual Meeting on Novel Materials from Wood or Cellulose, 2011, pp. 66-67.
[42]
S. Olsson et al., "The use of esterified lignin for synthesis of durable composites," in Proceedings of the 7th meeting of the Nordic-Baltic Network in Wood Material Science and Engineering (WSE), 2011, pp. 173-178.
[43]
K. Segerholm, M. Wålinder and D. Holmberg, "Adhesion studies of scots pine-polypropylene bond using ABES," in In Proceedings of the 6th meeting of the Nordic-Baltic Network in Wood Material Science and Engineering, WSE, 2010.
[44]
K. Segerholm and M. Wålinder, "Dimensional changes due to water sorption in high wood-content WPCs prepared with modified wood," in In Proceedings of the fifth European Conference on Wood Modification, ECWM5, 2010.
[45]
M. Wålinder, K. Segerholm and M. Westin, "Durability of high wood content WPCs," in Proceedings of the International Convention of Society of Wood Science and Technology andUnited Nations Economic Commission for Europe – Timber Committee, 2010.
[46]
M. Wålinder et al., "Liquids and coatings wettability and penetrability of acetylated scots pine sapwood," in In Proceedings of the fifth European Conference on Wood Modification, ECWM5, 2010, pp. 381-388.
[47]
E. Sidorova and T. Morén, "The Behaviour of Heat Treated Wooden Cladding Exposed to Extreme Climate Changes," in Proceedings of the 6th meeting of the Nordic-Baltic Network In Wood Material Science And Engineering (WSE), 2010, pp. 147-154.
[48]
K. Segerholm, A. Omidvar and M. Wålinder, "Acetylation to Minimize Water Uptake and Deformation of High Wood Content WPC," in The Fourth European Conference on Wood Modification, 2009, pp. 239-242.
[49]
M. Wålinder et al., "Micromorphology Studies of Modified Wood Using a Surface Preparation Technique Based on UV-Laser Ablation," in The Fourth European Conference on Wood Modification, 2009, pp. 103-110.
[50]
F. Englund et al., "Some Aspects on the Determination of Surface Chemical Composition and Wettability of Modified Wood," in Proceedings of the Fourth European Conference on Wood Modification, 2009, pp. 553-560.
Full list in the KTH publications portal
Page responsible:webmaster@byv.kth.se
Belongs to: Department of Civil and Architectural Engineering
Last changed: Sep 21, 2017