M. Stigsson and D. M. Ivars, "A Novel Conceptual Approach to Objectively Determine JRC Using Fractal Dimension and Asperity Distribution of Mapped Fracture Traces," Rock Mechanics and Rock Engineering, vol. 52, no. 4, pp. 1041-1054, 2019.
A. Ghaderi, A. Abbaszadeh Shahri and S. Larsson, "An artificial neural network based model to predict spatial soil type distribution using piezocone penetration test data (CPTu)," Bulletin of Engineering Geology and the Environment, vol. 78, no. 6, pp. 4579-4588, 2019.
A. Prästings, J. Spross and S. Larsson, "Characteristic values of geotechnical parameters in Eurocode 7," Proceedings of the Institution of Civil Engeneers : Geotechnical Engineering, vol. 172, no. 4, pp. 301-311, 2019.
A. Abbaszadeh Shahri et al., "Landslide susceptibility hazard map in southwest Sweden using artificial neural network," Catena (Cremlingen. Print), vol. 183, 2019.
K. R. Massarsch and C. Wersäll, "Monitoring and Process Control of Vibratory Driving," Geotechnical Engineering, vol. 50, no. 3, pp. 1-10, 2019.
H. Bjurström and N. Rydén, "Non-contact rolling surface wave measurements on asphalt concrete," International Journal on Road Materials and Pavement Design, vol. 20, no. 2, pp. 334-346, 2019.
S. Hov et al., "On empirical correlations for normalised shear strengths from fall cone and direct simple shear tests in soft Swedish clays," Geotechnical and Geological Engineering, 2019.
W. Bjureland et al., "Probability distributions of shotcrete parameters for reliability-based analyses of rock tunnel support," Tunnelling and Underground Space Technology, vol. 87, pp. 15-26, 2019.
J. Spross and T. Gasch, "Reliability-based alarm thresholds for structures analysed with the finite element method," Structural Safety, vol. 76, pp. 174-183, 2019.
J. Shamu and U. Håkansson, "Rheology of Cement Grouts: On the Critical Shear Rate and No-Slip Regime in the Couette Geometry," Cement and Concrete Research, 2019.
R. Ignat et al., "Triaxial extension and tension tests on lime-cement-improved clay," Soil and foundation, 2019.
A. Wonglert et al., "Bearing capacity and failure behaviors of floating stiffened deep cement mixing columns under axial load," Soil and foundation, vol. 58, no. 2, pp. 446-461, 2018.
P. Davy et al., "Elastic Properties of Fractured Rock Masses With Frictional Properties and Power Law Fracture Size Distributions," Journal of Geophysical Research - Solid Earth, vol. 123, no. 8, pp. 6521-6539, 2018.
J. Spross et al., "On the Need for a Risk-Based Framework in Eurocode 7 to Facilitate Design of Underground Openings in Rock," Rock Mechanics and Rock Engineering, vol. 51, no. 8, pp. 2427-2431, 2018.
C. Wersäll, I. Nordfelt and S. Larsson, "Resonant roller compaction of gravel in full-scale tests," Transportation Geotechnics, vol. 14, pp. 93-97, 2018.
J. Spross, L. Olsson and H. Stille, "The Swedish Geotechnical Society's methodology for risk management : a tool for engineers in their everyday work," Georisk : Assessment and Management of Risk for Engineered Systems and Geohazards, vol. 12, no. 3, pp. 183-189, 2018.
L. Zou, U. Håkansson and V. Cvetkovic, "Two-phase cement grout propagation in homogeneous water-saturated rock fractures," International Journal of Rock Mechanics And Mining Sciences, vol. 106, pp. 243-249, 2018.
W. Bjureland et al., "Challenges in applying fixed partial factors to rock engineering design," Geotechnical Special Publication, no. 283, pp. 384-393, 2017.
M. El Tani and H. Stille, "Grout Spread and Injection Period of Silica Solution and Cement Mix in Rock Fractures," Rock Mechanics and Rock Engineering, pp. 1-16, 2017.
A. Prästings et al., "Implementing the Extended Multivariate Approach in Design with Partial Factors for a Retaining Wall in Clay," ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering, vol. 3, no. 4, 2017.
S. Sadrizadeh et al., "Numerical, Experimental and Analytical Studies on Fluid Flow through a Marsh Funnel," Journal of Applied Fluid Mechanics, vol. 10, no. 6, pp. 1501-1507, 2017.
W. Bjureland et al., "Reliability aspects of rock tunnel design with the observational method," International Journal of Rock Mechanics And Mining Sciences, vol. 98, pp. 102-110, 2017.
F. Deckner et al., "Sheet pile behavior during vibratory driving : numerical study based on a field test," Soil Dynamics and Earthquake Engineering, 2017.
A. Nejad Ghafar et al., "Uncertainties in Grout Penetrability Measurements; Evaluation and Comparison of Filter pump, Penetrability meter and Short slot," Geotechnical and Geological Engineering, 2017.
A. Nejad Ghafar et al., "Varying aperture long slot (VALS), a method for studying grout penetrability into fractured hard rock," ASTM geotechnical testing journal, vol. 40, no. 5, pp. 871-882, 2017.
F. Deckner, K. Viking and S. Hintze, "Wave patterns in the ground : case studies related to vibratory sheet pile driving," Geotechnical and Geological Engineering, 2017.
J. Spross and F. Johansson, "When is the observational method in geotechnical engineering favourable?," Structural Safety, vol. 66, pp. 17-26, 2017.
A. Nejad Ghafar et al., "An Experimental Approach to the Development of Dynamic Pressure to Improve Grout Spread," Rock Mechanics and Rock Engineering, vol. 49, no. 9, pp. 3709-3721, 2016.
A. A. Shahri, "Assessment and Prediction of Liquefaction Potential Using Different Artificial Neural Network Models : A Case Study," Geotechnical and Geological Engineering, vol. 34, no. 3, pp. 807-815, 2016.
R. Ignat et al., "Behavior of braced excavation supported by panels of deep mixing columns," Canadian geotechnical journal (Print), vol. 53, no. 10, pp. 1671-1687, 2016.
M. Lingwanda et al., "Comparison of geotechnical uncertainties linked to different soil characterization methods," Geomechanics and Geoengineering, pp. 1-15, 2016.
H. Bjurström and N. Rydén, "Detecting the thickness mode frequency in a concrete plate using backward wave propagation," Journal of the Acoustical Society of America, vol. 139, no. 2, pp. 649-657, 2016.
Y. H. Dinegdae and B. Birgisson, "Effects of truck traffic on top-down fatigue cracking performance of flexible pavements using a new mechanics-based analysis framework," International Journal on Road Materials and Pavement Design, 2016.
H. Bjurström et al., "Field and laboratory stress-wave measurements of asphalt concrete," Construction and Building Materials, vol. 126, pp. 508-516, 2016.
A. Draganović and B. Lagerblad, "Filtration of silica particles from a low-pH cementitious grout," Construction and Building Materials, vol. 105, pp. 29-34, 2016.
R. de Frias Lopez et al., "Force transmission and soil fabric of binary granular mixtures," Geotechnique, vol. 66, no. 7, pp. 578-583, 2016.
A. Krounis et al., "Influence of cohesive strength in probabilstic sliding stability re-assessment of concrete dams," Journal of Geotechnical and Geoenvironmental Engineering, vol. 143, no. 2, 2016.
F. Johansson, "Influence of scale and matedness on the peak shear strength of fresh, unweathered rock joints," International Journal of Rock Mechanics And Mining Sciences, vol. 82, pp. 36-47, 2016.
A. Palmén et al., "Low-temperature calcite precipitation in sand using CIPS," Ground Improvement, vol. 169, no. 1, pp. 36-41, 2016.
A. Prästings, S. Larsson and R. Müller, "Multivariate approach in reliability-based design of a sheet pile wall," Transportation Geotechnics, vol. 7, pp. 1-12, 2016.
R. Müller, S. Larsson and J. Spross, "Multivariate stability assessment during staged construction," Canadian geotechnical journal (Print), vol. 53, no. 4, pp. 603-618, 2016.
J. Place et al., "On using the thin fluid-layer approach at ultrasonic frequencies for characterising grout propagation in an artificial fracture," International Journal of Rock Mechanics And Mining Sciences, vol. 89, pp. 68-74, 2016.
R. Esmaeilabadi and A. A. Shahri, "PREDICTION OF SITE RESPONSE SPECTRUM UNDER EARTHQUAKE VIBRATION USING AN OPTIMIZED DEVELOPED ARTIFICIAL NEURAL NETWORK MODEL," ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, vol. 10, no. 30, pp. 76-83, 2016.
Y. H. Dinegdae and B. Birgisson, "Reliability-based calibration for a mechanics-based fatigue cracking design procedure," International Journal on Road Materials and Pavement Design, vol. 17, no. 3, pp. 529-546, 2016.
R. de Frias Lopez, J. Ekblad and J. Silfwerbrand, "Resilient properties of binary granular mixtures: A numerical investigatio," Computers and geotechnics, vol. 76, pp. 222-233, 2016.
A. Krounis, F. Johansson and S. Larsson, "Shear strength of partially bonded concrete-rock interfaces for application in dam stability analyses," Rock Mechanics and Rock Engineering, vol. 49, no. 7, pp. 2711-2722, 2016.
C. Wersäll, I. Nordfelt and S. Larsson, "Soil compaction by vibratory roller with variable frequency," Geotechnique, 2016.
A. Abbaszadeh Shahri, S. Larsson and F. Johansson, "Updated relations for the uniaxial compressive strength of marlstones based on P-wave velocity and point load index test," INNOVATIVE INFRASTRUCTURE SOLUTIONS, vol. 1, no. 1, 2016.
J. Spross et al., "Using observational method to manage safety aspects of remedial grouting of concrete dam foundations," Geotechnical and Geological Engineering, vol. 34, no. 5, pp. 1613-1630, 2016.
J. Yaghoobi Rafi and H. Stille, "Applicability of using GIN method, by considering theoretical approach of grouting design," Geotechnical and Geological Engineering, vol. 33, no. 6, pp. 1431-1448, 2015.