Tidskrifter
Tidskrifter
[1]
A. Ahmadi et al.,
"Dynamic vehicle–track interaction and differential settlement in a transition zone on railway ballast : An integrated 3D discrete–continuum model,"
Computers and geotechnics, vol. 190, 2026.
[2]
T. A. Pham et al.,
"Group efficiency and load transfer mechanisms of semi-rigid soil–cement piles: integrated experimental, 3D numerical, and analytical evaluation,"
Computers and geotechnics, vol. 192, 2026.
[3]
D. O. Potyondy et al.,
"A 3D Subspring Network Breakable Voronoi Model for Rock,"
Rock Mechanics and Rock Engineering, 2025.
[4]
H. La, T. Nguyen och T. A. Pham,
"A novel hybrid metaheuristic-Bayesian machine learning model for accurate load-displacement prediction of pile foundations,"
Engineering structures, vol. 343, 2025.
[5]
L. F. Gomez de Alba et al.,
"A sensitivity study and robustness evaluation of the CWFS and DISL approaches for brittle failure continuum modelling around underground excavations,"
Tunnelling and Underground Space Technology, vol. 161, 2025.
[6]
T. A. Pham, R. Akan och A. Tabaroei,
"A simplified soil–structure interaction model for load–settlement analysis of piles,"
Canadian geotechnical journal (Print), vol. 62, 2025.
[7]
J. Larsson et al.,
"A Three-Factor Experimental Study on the Effect of Specimen Size on the Shear Strength of Rock Joints,"
Rock Mechanics and Rock Engineering, 2025.
[8]
T. A. Pham och F. Vahedifard,
"A Unified Soil–Structure Interaction Method for Load–Settlement Design of Energy Piles,"
Canadian geotechnical journal (Print), vol. 62, s. 1-50, 2025.
[9]
A. Ulfberg et al.,
"Analytical Assessment of Combined Sliding and Overturning Failure in Concrete Dams,"
Structural Engineering International, 2025.
[10]
T. A. Pham,
"Climate change impacts on geotechnical infrastructure: role of unsaturated soil mechanics for adaptation,"
Frontiers in Built Environment, vol. 11, 2025.
[11]
T. A. Pham et al.,
"Critical state mechanics-based arching model for pile-supported embankments,"
Geotextiles and Geomembranes, vol. 53, no. 4, s. 909-937, 2025.
[12]
A. Tabaroei et al.,
"Deep Excavation–Induced Stability Evaluation of a Triple Tunnel Using Discrete and Continuum Numerical Modeling,"
International Journal of Geomechanics, vol. 25, no. 1, 2025.
[13]
L. R. Alejano et al.,
"Dry Masonry Retaining Walls: Physical Models and Comparison with Analytical and Numerical Approaches,"
Rock Mechanics and Rock Engineering, 2025.
[14]
S. Zhang et al.,
"Experimental Study on Erosion and Viscous Fingering of Fresh Cement-Based Grout After Injection Stops,"
Rock Mechanics and Rock Engineering, vol. 58, no. 6, s. 6851-6868, 2025.
[15]
K. Hou et al.,
"Fatigue test and peridynamic simulation of cement-treated recycled aggregate mixture derived from building demolition waste,"
Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), vol. 56, no. 4, s. 1426-1439, 2025.
[16]
I. Pérez-Rey et al.,
"ISRM Suggested Method for Determining the Tensile Strength and Elastic Constants of Rocks by the Direct Tension Test,"
Rock Mechanics and Rock Engineering, 2025.
[17]
S. Hov et al.,
"Laboratory scale column penetration tests for deep mixing purposes,"
Canadian geotechnical journal (Print), vol. 62, 2025.
[18]
A. G. Corkum, B. Jeans och D. Mas Ivars,
"Leeb hardness test as a tool for joint wall compressive strength (JCS) evaluation,"
Engineering Geology, vol. 344, 2025.
[19]
M. Mohammadi et al.,
"Modelling construction performance variability for probabilistic time estimation of tunnelling projects,"
Georisk : Assessment and Management of Risk for Engineered Systems and Geohazards, vol. 19, no. 3, s. 497-512, 2025.
[20]
M. Wang et al.,
"Novel vibratory compaction quality indices developed from particle migration and distribution characteristics for unbound aggregate materials,"
Case Studies in Construction Materials, vol. 22, 2025.
[21]
L. Crusat et al.,
"Numerical modeling of rock spalling around a tunnel using visco-plastic interface elements and a rock removal strategy,"
International Journal of Rock Mechanics And Mining Sciences, vol. 191, 2025.
[22]
W. Hua, C. Wersäll och S. Larsson,
"Packningskontroll för framtiden : Modern teknik i stället för långsamma försök,"
Bygg och Teknik, no. 1, s. 24-27, 2025.
[23]
K. Mosley et al.,
"Simulation of Coupled THMC Processes in Fractured Rocks Using a Dual-Media Approach,"
Rock Mechanics and Rock Engineering, 2025.
[24]
H. Farajollahi, M. Mohammadi och M. H. Khosravi,
"The Applicability of Rock Bolt Supporting Factor based on Rock Mass Behavior: A Case Study of Alborz Tunnel,"
Journal of Mining and Environment, vol. 16, no. 2, s. 599-611, 2025.
[25]
J. Sorgatz, A. Janzen och J. Spross,
"Uncertainty assessment of effective friction angle of non-cohesive materials combining data from cone penetration and shear tests,"
Canadian geotechnical journal (Print), vol. 62, s. 1-17, 2025.
[26]
A. Abbaszadeh Shahri, C. Shan och S. Larsson,
"A hybrid ensemble-based automated deep learning approach to generate 3D geo-models and uncertainty analysis,"
Engineering with Computers, vol. 40, no. 3, s. 1501-1516, 2024.
[27]
E. Olsson et al.,
"A numerical framework for modelling settlements of railway ballast layers,"
TRANSPORTATION GEOTECHNICS, vol. 44, 2024.
[28]
J. Y. Gui et al.,
"Analytical and experimental studies on toppling behavior of blocks misaligned with the slope face,"
Bulletin of Engineering Geology and the Environment, vol. 83, no. 4, 2024.
[29]
E. Lavoine et al.,
"Assessing Stress Variability in Fractured Rock Masses with Frictional Properties and Power Law Fracture Size Distributions,"
Rock Mechanics and Rock Engineering, vol. 57, no. 4, s. 2407-2420, 2024.
[30]
I. Pérez-Rey et al.,
"Assessment of Direct Tensile Strength Tests in Rock Through a Multi-laboratory Benchmark Experiment,"
Rock Mechanics and Rock Engineering, vol. 57, no. 5, s. 3617-3634, 2024.
[31]
A. Cristóbal et al.,
"Automatic Characterization of Block-In-Matrix Rock Outcrops through Segmentation Algorithms and Its Application to an Archaeo-Mining Case Study,"
Geosciences, vol. 14, no. 2, 2024.
[32]
C. Darcel et al.,
"Coupling stress and transmissivity to define equivalent directional hydraulic conductivity of fractured rocks,"
Engineering Geology, vol. 342, 2024.
[33]
T. A. Pham, S. Nadimi och M. Sutman,
"Critical Review of Physical-Mechanical Principles in Geostructure-Soil Interface Mechanics,"
Geotechnical and Geological Engineering, vol. 42, no. 8, s. 6757-6808, 2024.
[34]
Y. Xiao et al.,
"Evaluating enhancement effect of bottom groove shape on lateral resistance of frictional sleepers in ballasted railway track via hybrid DEM-FDM approach,"
Construction and Building Materials, vol. 436, 2024.
[35]
S. Libby et al.,
"Exploring the impact of fracture interaction on connectivity and flow channelling using grown fracture networks,"
Quarterly journal of engineering geology and hydrogeology, vol. 57, no. 1, 2024.
[36]
L. Zou, D. M. Ivars och V. Cvetkovic,
"Impact of multiscale surface roughness on shear behavior of rock fractures,"
Tunnelling and Underground Space Technology, vol. 153, 2024.
[37]
A. Ahmadi, C. Wersäll och S. Larsson,
"Impact of particle arrangement and model dimensions on DEM modeling of high-speed railway ballasted tracks in 2D and 3D,"
Transportation Geotechnics, vol. 47, 2024.
[38]
K. Hou et al.,
"Insights into the failure mechanisms of cement-treated recycled aggregate materials (CRAMs) under uniaxial compression via peridynamics,"
Construction and Building Materials, vol. 451, 2024.
[39]
I. Samuelsson, J. Spross och S. Larsson,
"Integrating life-cycle environmental impact and costs into geotechnical design,"
Proceedings of the Institution of Civil Engineers : Engineering Sustainability, vol. 177, s. 19-30, 2024.
[40]
M. Mohammadi och J. Spross,
"Models to Analyze Risk in Time and Cost Estimation of Tunneling Projects,"
Geotechnical and Geological Engineering, vol. 42, no. 2, s. 1445-1457, 2024.
[41]
A. Abbaszadeh Shahri et al.,
"Normalizing Large Scale Sensor-Based MWD Data : An Automated Method toward A Unified Database,"
Sensors, vol. 24, no. 4, 2024.
[42]
D. Bista et al.,
"Numerical parametric study on the influence fl uence of location and inclination of large-scale asperities on the shear strength of concrete- rock interfaces of small buttress dams,"
Journal of Rock Mechanics and Geotechnical Engineering, vol. 16, no. 10, s. 4319-4329, 2024.
[43]
E. Bismut et al.,
"Optimal adaptive decision rules in geotechnical construction considering uncertainty,"
Geotechnique, vol. 74, no. 13, s. 1622-1633, 2024.
[44]
M. Mohammadi och J. Spross,
"Probabilistic time estimation of tunnels constructed with multiple headings,"
Tunnelling and Underground Space Technology, vol. 153, 2024.
[45]
D. R. Damasceno, J. Spross och F. Johansson,
"Reliability-based design tool for gas storage in lined rock caverns,"
Georisk : Assessment and Management of Risk for Engineered Systems and Geohazards, vol. 18, s. 410-422, 2024.
[46]
M. A. González-Fernández et al.,
"Size effects on strength and deformability of artificially jointed hard rock,"
International Journal of Rock Mechanics And Mining Sciences, vol. 176, 2024.
[47]
T. A. Pham, S. Nadimi och M. Sutman,
"Softening-based interface model and nonlinear load-settlement response analysis of piles in saturated and unsaturated multi-layered soils,"
Computers and geotechnics, vol. 171, 2024.
[48]
J. Gui et al.,
"Stability against toppling of a single rock block resting on an irregular rough base,"
Environmental Earth Sciences, vol. 83, no. 23, 2024.
[49]
S. De Simone et al.,
"The Impact of Size-Dependent and Stress-Dependent Fracture Properties on the Biot and Skempton Coefficients of Fractured Rocks,"
Rock Mechanics and Rock Engineering, vol. 57, no. 11, s. 8929-8950, 2024.
[50]
M. C. Saceanu et al.,
"Thermo-mechanical modelling of spalling around the deposition boreholes in an underground nuclear waste repository during its thermal phase,"
International Journal of Rock Mechanics And Mining Sciences, vol. 183, 2024.