Tidskrifter
Tidskrifter
[1]
A. Dervishaj och K. Gudmundsson,
"From LCA to circular design : A comparative study of digital tools for the built environment,"
Resources, Conservation and Recycling, vol. 200, s. 1-19, 2024.
[2]
F. Liu et al.,
"Evolution of particle size distribution and water content for oily particles in machining workshops,"
Journal of Building Engineering, vol. 84, 2024.
[3]
A. Dervishaj och K. Gudmundsson,
"Sunlight Autonomy for Buildings: A New Methodology for Evaluating Sunlight Performance in Urban and Architectural Design,"
LEUKOS The Journal of the Illuminating Engineering Society of North America, s. 1-31, 2024.
[4]
J. C. Lorentzen et al.,
"Mold Odor from Wood Treated with Chlorophenols despite Mold Growth That Can Only Be Seen Using a Microscope,"
Microorganisms, vol. 12, no. 2, 2024.
[5]
L. Lei et al.,
"A dynamic anomaly detection method of building energy consumption based on data mining technology,"
Energy, vol. 263, s. 125575, 2023.
[6]
S. M. Alirahmi et al.,
"An innovative four-objective dragonfly-inspired optimization algorithm for an efficient, green, and cost-effective waste heat recovery from SOFC,"
Energy, vol. 263, 2023.
[7]
W. Liu, T. (. Zhang och D. Lai,
"Inverse design of a thermally comfortable indoor environment with a coupled CFD and multi-segment human thermoregulation model,"
Building and Environment, vol. 227, 2023.
[8]
A. Behzadi och S. Sadrizadeh,
"A rule-based energy management strategy for a low-temperature solar/ wind-driven heating system optimized by the machine learning-assisted grey wolf approach,"
Energy Conversion and Management, vol. 277, s. 116590, 2023.
[9]
R. Sun et al.,
"Building form and outdoor thermal comfort : Inverse design the microclimate of outdoor space for a kindergarten,"
Energy and Buildings, vol. 284, 2023.
[10]
S. Ma et al.,
"Temperature-dependent particle mass emission rate during heating of edible oils and their regression models,"
Environmental Pollution, vol. 323, 2023.
[11]
Z. Chen et al.,
"A review of data-driven fault detection and diagnostics for building HVAC systems,"
Applied Energy, vol. 339, 2023.
[12]
H. Amjadimanesh et al.,
"Micro-particle deposition in maxillary sinus for various sizes of opening in a virtual endoscopic surgery,"
Experimental and Computational Multiphase Flow, vol. 5, no. 3, s. 262-271, 2023.
[13]
S. Ma et al.,
"Comparison of the time-dependent characteristics between particle mass and particle number emissions during oil heating and emission mitigation strategies,"
Building and Environment, vol. 242, 2023.
[14]
S. Ma et al.,
"Temperature-dependent particle number emission rates and emission characteristics during heating processes of edible oils,"
Environmental Pollution, vol. 333, 2023.
[15]
P. Li, W. Liu och T. (. Zhang,
"CFD modeling of dynamic airflow and particle transmission in an aircraft lavatory,"
Building Simulation, vol. 16, no. 8, s. 1375-1390, 2023.
[16]
A. Kabanshi et al.,
"Windows of Opportunities : Orientation, Sizing and PV-Shading of the Glazed Area to Reduce Cooling Energy Demand in Sub-Sahara Africa,"
Energies, vol. 16, no. 9, s. 3834, 2023.
[17]
A. Behzadi et al.,
"An efficient renewable hybridization based on hydrogen storage for peak demand reduction : A rule-based energy control and optimization using machine learning techniques,"
Journal of Energy Storage, vol. 57, 2023.
[18]
A. Dervishaj,
"From Sustainability to Regeneration : a digital framework with BIM and computational design methods,"
Architecture, Structures and Construction, vol. 3, no. 3, s. 315-336, 2023.
[19]
F. Liu et al.,
"Shape optimization of the exhaust hood in machining workshops by a discrete adjoint method,"
Building and Environment, vol. 244, 2023.
[20]
H. Pieskä, A. Ploskic och Q. Wang,
"Life-cycle assessment of a radiant high-temperature cooling system in the Mediterranean climate,"
Building and Environment, vol. 245, 2023.
[21]
A. Behzadi och S. Sadrizadeh,
"Grid-tied solar and biomass hybridization for multi-family houses in Sweden : An optimal rule-based control framework through machine learning approach,"
Renewable energy, vol. 218, 2023.
[22]
Y. Wang et al.,
"Prediction of urban airflow fields around isolated high-rise buildings using data-driven non-linear correction models,"
Building and Environment, vol. 246, 2023.
[23]
A. Fonsati et al.,
"From Geotechnical Data to GeoBIM Models : Testing Strategies for an Ex-Industrial Site in Turin,"
Buildings, vol. 13, no. 9, 2023.
[24]
W. Liu et al.,
"An open-source and experimentally guided CFD strategy for predicting air distribution in data centers with air-cooling,"
Building and Environment, vol. 242, 2023.
[25]
H. Amjadimanesh et al.,
"The effect of body position while coughing on the airborne transmission of pathogens,"
Physics of fluids, vol. 34, no. 4, s. 041902, 2022.
[26]
L. Lei et al.,
"Inverse modeling of thermal boundary conditions in commercial aircrafts based on Green's function and regularization method,"
Building and Environment, vol. 217, 2022.
[27]
S. Zheng et al.,
"Evaluation and comparison of various fast fluid dynamics modeling methods for predicting airflow around buildings,"
Building Simulation, vol. 15, no. 6, s. 1083-1095, 2022.
[28]
L. Lei och W. Liu,
"Predictive control of multi-zone variable air volume air-conditioning system based on radial basis function neural network,"
Energy and Buildings, vol. 261, s. 111944, 2022.
[29]
F. Yuan et al.,
"Thermal comfort in hospital buildings - A literature review,"
Journal of Building Engineering, vol. 45, 2022.
[30]
T. Dai et al.,
"Evaluation of fast fluid dynamics with different turbulence models for predicting outdoor airflow and pollutant dispersion,"
Sustainable cities and society, vol. 77, s. 103583, 2022.
[31]
M. Hu et al.,
"Comparing calculation methods of state transfer matrix in Markov chain models for indoor contaminant transport,"
Building and Environment, vol. 207, s. 108515, 2022.
[32]
W. Liu et al.,
"Performance of fast fluid dynamics with a semi-Lagrangian scheme and an implicit upwind scheme in simulating indoor/outdoor airflow,"
Building and Environment, vol. 207, 2022.
[33]
S. Ma et al.,
"Indoor thermal environment in a rural dwelling heated by air-source heat pump air-conditioner,"
Sustainable Energy Technologies and Assessments, vol. 51, 2022.
[34]
A. Behzadi et al.,
"A comparative evaluation of alternative optimization strategies for a novel heliostat-driven hydrogen production/injection system coupled with a vanadium chlorine cycle,"
Energy Conversion and Management, vol. 267, s. 115878, 2022.
[35]
F. Nasiri et al.,
"Data Analytics and Information Technologies for Smart Energy Storage Systems : A State-of-the-Art Review,"
Sustainable cities and society, vol. 84, s. 104004, 2022.
[36]
H. Shamohammadi et al.,
"3D numerical simulation of hot airflow in the human nasal cavity and trachea,"
Computers in Biology and Medicine, vol. 147, s. 105702, 2022.
[37]
K. Moshksayan et al.,
"In-silico investigation of airflow and micro-particle deposition in human nasal airway pre- and post-virtual transnasal sphenoidotomy surgery,"
Computer Methods in Biomechanics and Biomedical Engineering, vol. 25, no. 9, s. 1000-1014, 2022.
[38]
T. Izadi et al.,
"The effect of ventilation system with and without under-platform exhaust on the concentration of braking micro-particles inside the subway system,"
Tunnelling and Underground Space Technology, vol. 128, 2022.
[39]
S. Sadrizadeh et al.,
"Indoor air quality and health in schools : A critical review for developing the roadmap for the future school environment,"
Journal of Building Engineering, vol. 57, 2022.
[40]
J. C. Lorentzen et al.,
"Overcrowding and Hazardous Dwelling Condition Characteristics : A Systematic Search and Scoping Review of Relevance for Health,"
International Journal of Environmental Research and Public Health, vol. 19, no. 23, 2022.
[41]
Y. Liu, Z. Long och W. Liu,
"A semi-empirical mesh strategy for CFD simulation of indoor airflow,"
Indoor + Built Environment, vol. 31, no. 9, s. 2240-2256, 2022.
[42]
H. Pieskä et al.,
"Thermodynamic and thermal comfort performance evaluation of two geothermal high-temperature cooling systems in the mediterranean climate,"
Journal of Building Engineering, vol. 56, s. 104738-104738, 2022.
[43]
A. Behzadi et al.,
"Smart design and control of thermal energy storage in low-temperature heating and high-temperature cooling systems : A comprehensive review,"
Renewable & sustainable energy reviews, vol. 166, s. 112625, 2022.
[44]
S. Marashian, S. Sadrizadeh och O. Abouali,
"Modeling particle distribution in a ventilated room with modified discrete random walk methods,"
The International Journal of Ventilation, s. 1-18, 2022.
[45]
P. Sadeghian et al.,
"The role of design parameters on the performance of diffuse ceiling ventilation systems – thermal comfort analyses for indoor environment,"
Advances in Building Energy Research, s. 1-19, 2022.
[46]
P. Sadeghian et al.,
"Reducing the risk of viral contamination during the coronavirus pandemic by using a protective curtain in the operating room,"
Patient Safety in Surgery, vol. 16, no. 1, 2022.
[47]
S. Sadrizadeh et al.,
"Aerodynamic analysis of simple girder bridges under construction phase,"
Applied Sciences, vol. 11, no. 12, 2021.
[48]
A. Wintersand et al.,
"Individual airborne characteristics of dog allergens,"
Clinical and Experimental Allergy, vol. 51, no. 9, s. 1221-1224, 2021.
[49]
M. Moniripiri et al.,
"Numerical simulation of unsteady airflow in a nasal cavity for various sizes of maxillary sinus opening in a virtual endoscopic surgery,"
Respiratory Physiology & Neurobiology, vol. 291, s. 103690, 2021.
[50]
L. Lei et al.,
"A building energy consumption prediction model based on rough set theory and deep learning algorithms,"
Energy and Buildings, vol. 240, 2021.