Skip to main content
To KTH's start page To KTH's start page

Student Theses

Student Theses

[1]
E. Isberg, "CFD-modeling of labyrinth weir flood discharge with ice cover," , 2023.
[2]
D. Attia and S. Kiryakos, "Climate improved concrete structures : Possibilities in design and construction," , 2023.
[3]
J. Abdalnour and M. Saliba, "Drop-weight impact tests on reinforced concrete beams," , 2023.
[4]
S. Hardo and D. Maher, "Extreme renovation of concrete buildings," , 2023.
[5]
A. Al-Bazarkan and H. Alahmad, "Loading tests on composite concrete columns : A comparison between composite columns made of permanent 3DPC formwork filled with SCC and columns made of homogenous SCC," , 2023.
[6]
R. Haj Hussein and W. Ali Abdulhadi, "Swedish Concrete Roads : Performance, Damages and Rehabilitation 10-30 Years after Construction," , 2023.
[7]
D. Uludag, "The Effect of Chloride-Induced Corrosion Patterns on the Crack Width of Reinforced Concrete," , 2023.
[8]
A. Lindblom and E. Ånger, "Assessment of ice loads on piled structures based on local conditions," , 2022.
[9]
S. Dal and S. Raheb Khalo, "CLIMATE-SMART CONCRETE APPLIED ON A SLAB FRAME BRIDGE," , 2022.
[10]
E. Brodd and L. Östlund, "Environmental and technical evaluation of cement reduction and test methods for fibre reinforced shotcrete in tunnels," , 2022.
[11]
E. Brodd and L. Östlund, "Environmental and technical evaluation of cement reduction and test methods for fibre reinforced shotcrete in tunnels," , 2022.
[12]
S. Anand, "EVALUATION OF ENVIRONMENTAL AND TECHNICAL PERFORMANCE OF ALTERNATE FIBRES FOR SHOTCRETE IN TUNNELS," , 2022.
[13]
E. Osmic, "Frost prediction in heat exchangers : The influence of relative humidity and outdoor temperature on frost formation in plate heat exchangers," , 2022.
[14]
C. Youssef and M. Basilious, "Global Analysis of a Tall Timber- Concrete Hybrid Structure Subjected to Wind Load : A Parametric Study of Different Hybrid Solutions," , 2022.
[15]
J. Alexandersson, "Life Cycle Cost Analysis of two high temperature cooling systems supplied by geothermal energy : A Case Study in Sant-Cugat, Spain," , 2022.
[16]
R. Durand, "Low-carbon concretes in infrastructures : Applicability, potential and carbon footprint focusing on the Parisian Metro Line L18," , 2022.
[17]
M. Abdi and D. Ntzimanis, "Numerical simulations of pore pressure on concrete buttress dams," , 2022.
[18]
G. L'Hostis, "On the usage of calcined clays in the French construction industry," , 2022.
[19]
J. Tattari, "Optimized design of a load transfer concrete slab," , 2022.
[20]
D. Andersson, "Shear Failure of Steel Fiber and Bar Reinforced Concrete Beams Without Stirrups : Predictions based on Nonlinear Finite Element Analyses," , 2022.
[21]
M. Burton and K. Näsén, "Simulation of load capacity of 3D printed concrete patterns," , 2022.
[22]
E. Kafková, "Study of permanent formwork made of high-performance concrete as protection of concrete with recycled aggregate," , 2022.
[23]
J. Jensen and M. Leijström, "Use of Digital Image Correlation for monitoring of concrete buttress dam failure model tests," , 2022.
[24]
Y. Vicedo, "Applications of steel-plate composite structures for nuclear modular construction," , 2021.
[25]
A. M. Osman Fadul, "Assessing the safety of cracked concrete dams," , 2021.
[26]
E. Gegerfelt and A. Hasselqvist, "Concrete in vertical slipforms : A process for determining a suitable concrete composition," , 2021.
[27]
S. Harrison and S. Nöjd, "Influence of Foundation Modelling on the Seismic Response of a Concrete Dam," , 2021.
[28]
S. Akbar and M. Carlie, "Long-term deformation of balanced cantilever bridges due to non-uniform creep and shrinkage," , 2021.
[29]
D. Lillemo, "Modelling masonry spires : An investigation," , 2021.
[30]
A. Frank and A. Fristedt, "Numerical simulations of shear reinforced concrete beams subjected to blast loads," , 2021.
[31]
S. Boned Ferrer, "Performance of 3D printed concrete formworks for bridge pillars focusing on casting," , 2021.
[32]
B. Azad, "Shear strength of prestressed concrete beams without shear reinforcement : A comparison between equations," , 2021.
[33]
A. Petkoglou, "Stability of building structures using NLFEA including second order effects : Applications with the software ATENA-GiD," , 2021.
[34]
J. CONTRERAS MORENO and K. D. GHEBREIGZIABHER, "Aeration and risk mitigation for flood discharge tunnel in Zipingpu water conservancy project," , 2020.
[35]
R. Roy, "Bacteria - based self - healing mortar with bio - plastic healing agents : Comparative analysis on quantification and characterization of self-healing by various experimental techniques," , 2020.
[36]
I. Nilsson and L. Sandström, "Behavior prediction of concrete dams," , 2020.
[37]
D. Hofgård and J. Sundkvist, "Climate enhanced concrete in the civil engineering industry," , 2020.
[38]
V. Peterson and Z. Wang, "Cross-comparison of Non-Linear Seismic Assessment Methods for Unreinforced Masonry Structures in Groningen," , 2020.
[39]
V. Peterson and Z. Wang, "Cross-comparison of Non-Linear Seismic Assessment Methods for Unreinforced Masonry Structures in Groningen," , 2020.
[40]
B. W. Woldemikael, "Effects of cracking of coupling beams onhigh rise towers subjected to wind load," , 2020.
[41]
Á. Hernando Cabrero, "Expansion of Existing Gravity-Based Offshore Wind Turbine Foundations," , 2020.
[42]
S. T. Rasool and O. Sharif, "Expansion of Sickla treatment plant : A study about the replacement of standard concrete to green concrete," , 2020.
[43]
H. Hassan and A. Sahal, "Experimental Tests of Pre - placed Aggregate Concrete for Concrete Repairs," , 2020.
[44]
A. OUSTAMPASIDIS, "Fiber distribution in ready-mix concrete," , 2020.
[45]
A. Hassan, "Handling river floating debris for dam safety – the state of the practice," , 2020.
[46]
M. Rengarajan, "Laboratory testing of shotcrete with fibres of steel, basalt or synthetic materials," , 2020.
[47]
I. Zuwak and W. Kordoghly, "Numerical study of the effect of thermal ice loads on concrete dams," , 2020.
[48]
S. Thuresson, "Parametric optimization of reinforced concrete slabs subjected to punching shear," , 2020.
[49]
P. Jalal and J. A. Perez, "Punching shear in concrete flat slabs supported on slender edge steel columns," , 2020.
[50]
L. Liang, "Recycling of concrete waste with wood waste through heating compaction," , 2020.
Full list in the KTH publications portal
Page responsible:admin@byv.kth.se
Belongs to: Department of Civil and Architectural Engineering
Last changed: Feb 25, 2022