Journal papers
Journal papers
[1]
S. Yaqoob and J. Silfwerbrand,
"Assessing the Effectiveness of Dowel Bars in Jointed Plain Concrete Pavements Using Finite Element Modelling,"
Materials, vol. 18, no. 3, 2025.
[2]
Q. Li et al.,
"Dissolved Oxygen Modeling by a Bayesian-Optimized Explainable Artificial Intelligence Approach,"
Applied Sciences, vol. 15, no. 3, 2025.
[3]
A. Jansson et al.,
"Experimental investigation on prevalent local failure mechanisms in hard rock tunnel linings using distributed optical fibre sensors,"
Engineering structures, vol. 333, 2025.
[4]
S. Zhang et al.,
"Kinematic responses of pipe piles considering the effects of soil plugs and underlying strata subjected to P-waves,"
Acta Geotechnica, 2025.
[5]
W. Gan et al.,
"Mesoscopic modeling the interaction of two attached-wall cavitation bubbles,"
Ultrasonics sonochemistry, vol. 117, 2025.
[6]
A. Dervishaj et al.,
"A digital workflow for assessing lifespan, carbonation, and embodied carbon of reusing concrete in buildings,"
Journal of Building Engineering, vol. 96, pp. 1-23, 2024.
[7]
S. Yaqoob, J. Silfwerbrand and R. Balieu,
"A Parametric Study Investigating the Dowel Bar Load Transfer Efficiency in Jointed Plain Concrete Pavement Using a Finite Element Model,"
Buildings, vol. 14, no. 4, 2024.
[8]
S. Li, J. Yang and P. Teng,
"Data-driven prediction of cylinder-induced unsteady wake flow,"
Applied Ocean Research, vol. 150, 2024.
[9]
Q. Li et al.,
"Effect of Rotating Magnetic Field on the Thermocapillary Flow Instability in a Liquid Bridge,"
Microgravity, science and technology, vol. 36, no. 2, 2024.
[10]
U. Farooq et al.,
"Evaluation of pedotransfer functions to estimate soil water retention curve : a conceptual review,"
Water, vol. 16, no. 17, 2024.
[11]
J. Silfwerbrand,
"Form Pressure in Composite Columns of 3DPC and SCC,"
Nordic Concrete Research, vol. 71, no. 1, pp. 137-151, 2024.
[12]
J. Hernández Vargas et al.,
"Internal topology optimisation of 3D printed concrete structures : a method for enhanced performance and material efficiency,"
Virtual and Physical Prototyping, vol. 19, no. 1, 2024.
[13]
S. Li, J. Yang and X. He,
"Modeling transient flow dynamics around a bluff body using deep learning techniques,"
Ocean Engineering, vol. 295, 2024.
[14]
U. Farooq, S. Li and J. Yang,
"Numerical Analysis of Flow Characteristics and Energy Dissipation on Flat and Pooled Stepped Spillways,"
Water, vol. 16, no. 18, 2024.
[15]
J. Yang and S. Li,
"Piano Key Weir (PKW)—Improvement in Conventional Geometry for Augmented Discharge Capacity,"
Water, vol. 16, no. 23, 2024.
[16]
R. Hellgren and R. Malm,
"Systematic Literature Search and Meta Regression of Measured Static Ice Loads on Concrete Dams,"
Journal of cold regions engineering, vol. 38, no. 2, 2024.
[17]
N. Hu et al.,
"Ventilation performance evaluation of an operating room with temperature-controlled airflow system in contaminant control: A numerical study,"
Building and Environment, vol. 259, 2024.
[18]
S. Li and J. Yang,
"A hybrid gene expression programming model for discharge prediction,"
Proceedings of the Institution of Civil Engineers : Water Management, vol. 176, no. 5, pp. 223-234, 2023.
[19]
J. Yang, P.-L. Ligier and U. Kuoljok,
"Challenges with air demand for the refurbishment of bottom outlets,"
International journal on hydropower and dams, vol. 30, no. 2, 2023.
[20]
P. Rogers et al.,
"Chloride Ion Diffusion Resistance of Bulk Hydrophobic Concrete : Comparison of w/c and Dosages,"
Nordic Concrete Research, vol. 68, no. 1, pp. 17-38, 2023.
[21]
V. Belloni et al.,
"Crack Monitoring from Motion (CMfM) : Crack detection and measurement using cameras with non-fixed positions,"
Automation in Construction, vol. 156, 2023.
[22]
S. Li, J. Yang and A. Ansell,
"Data-driven reduced-order simulation of dam-break flows in a wetted channel with obstacles,"
Ocean Engineering, vol. 287, 2023.
[23]
A. Sjölander et al.,
"Experimental dataset to assess the structural performance of cracked reinforced concrete using Digital Image Correlation techniques with fixed and moving cameras,"
Data in Brief, vol. 51, 2023.
[24]
J. Yang et al.,
"Geometric Modification of Piano Key Weirs to Enhance Hydraulic Performance and Discharge Capacity,"
Water, vol. 15, no. 23, 2023.
[25]
A. Sjölander, A. Ansell and E. Nordström,
"On the Design of Permanent Rock Support Using Fibre-Reinforced Shotcrete,"
Fibers, vol. 11, no. 2, pp. 20, 2023.
[26]
J. Enzell et al.,
"Physical Model Tests of Concrete Buttress Dams with Failure Imposed by Hydrostatic Water Pressure,"
Water, vol. 15, no. 20, 2023.
[27]
L. Östlund, A. Sjölander and E. Brodd,
"Post-Cracking Behaviour of Fibre-Reinforced Shotcrete : A Numerical Comparison between Beams and Panels,"
Fibers, vol. 11, no. 7, pp. 59-59, 2023.
[28]
J. Yang and P. Andreasson,
"Rebuilding a chute spillway for effective energy dissipation,"
International journal on hydropower and dams, vol. 30, no. 2, 2023.
[29]
J. Lagerlund et al.,
"Testing of a low-mobility grout material for permeation grouting in embankment dams,"
Geotechnical Research, pp. 1-11, 2023.
[30]
E. Brodd, A. Sjölander and L. Östlund,
"The Use of Slag in Accelerated Shotcrete for Rock Support : A Pilot Study on the Influence on the Early Compressive Strength,"
Nordic Concrete Research, vol. 69, no. 2, pp. 73-86, 2023.
[31]
A. Sjölander et al.,
"Towards Automated Inspections of Tunnels: A Review of Optical Inspections and Autonomous Assessment of Concrete Tunnel Linings,"
Sensors, vol. 23, no. 6, pp. 3189-3189, 2023.
[32]
H. Westerlind, J. Hernández Vargas and J. Silfwerbrand,
"Towards the Application of Mesostructures in 3D Concrete Printing : Evaluating Load-bearing Performance,"
Nordic Concrete Research, vol. 69, no. 2, pp. 87-100, 2023.
[33]
S. Li and J. Yang,
"Two-phase flow modelling by an error-corrected population balance model,"
Engineering Applications of Computational Fluid Mechanics, vol. 17, no. 1, 2023.
[34]
P. Schönbeck, M. Löfsjögård and A. Ansell,
"A Decision Support System for Hospital Configurations in Construction Projects,"
Buildings, vol. 12, no. 10, pp. 1-15, 2022.
[35]
J. Silfwerbrand,
"Closure : Industrial Floors with Fiber-Reinforced Concrete,"
Concrete International, vol. 44, no. 7, pp. 34-35, 2022.
[36]
M. Döse and J. Silfwerbrand,
"Effect of Carbonation on Radon Exhalation Rate in Concrete,"
ACI Materials Journal, vol. 119, no. 03, pp. 67-78, 2022.
[37]
R. Hellgren et al.,
"Estimating the Ice Loads on Concrete Dams Based on Their Structural Response,"
Water, vol. 14, no. 4, 2022.
[38]
S. Li, J. Yang and A. Ansell,
"Evaluation of Pool-Type Fish Passage with Labyrinth Weirs,"
Sustainability, vol. 14, no. 3, 2022.
[39]
A. Sjölander and A. Ansell,
"Failure Mechanisms of Fibre Reinforced Shotcrete : Numerical Simulations Considering Local Variations in Thickness and Bond Strength,"
Nordic Concrete Research, vol. 67, no. 2, pp. 51-64, 2022.
[40]
P. Schönbeck, M. Löfsjögård and A. Ansell,
"Framework for change control in healthcare construction projects compared to current practice,"
International Journal of Construction Management, vol. 22, no. 12, pp. 2405-2412, 2022.
[41]
R. Hellgren et al.,
"Ice load measurements on Rätan concrete dam using different sensor types,"
Cold Regions Science and Technology, vol. 193, 2022.
[42]
S. Li and J. Yang,
"Improved river water-stage forecasts by ensemble learning,"
Engineering with Computers, 2022.
[43]
L. E. Bryne and B. Lagerblad,
"Interfacial Transition Zone between Young Shotcrete and Hard Rock,"
ACI Materials Journal, vol. 119, no. 5, pp. 3-9, 2022.
[44]
S. Li and J. Yang,
"Modelling of suspended sediment load by Bayesian optimized machine learning methods with seasonal adjustment,"
Engineering Applications of Computational Fluid Mechanics, vol. 16, no. 1, pp. 1883-1901, 2022.
[45]
V. Peterson, A. Ansell and M. Hallgren,
"On the Residual Static and Impact Capacity of Shear-Reinforced Concrete Beams Subjected to an Initial Impact,"
Applied Sciences, vol. 12, no. 22, pp. 11377, 2022.
[46]
J. Yang, S. Li and C. Lin,
"Plausible Differences between the Laboratory and Prototype Behaviors of Spillway Aerator Flows,"
Water, vol. 14, no. 20, 2022.
[47]
J. Enzell, R. Malm and M. Tollsten,
"Predicting the Influence of Seasonal Thermally Induced Cracking on a Reinforced Concrete Arch Dam,"
KSCE Journal of Civil Engineering, vol. 26, no. 6, pp. 2707-2721, 2022.
[48]
S. Li, J. Yang and A. Ansell,
"Discharge prediction for rectangular sharp-crested weirs by machine learning techniques,"
Flow Measurement and Instrumentation, vol. 79, 2021.
[49]
R. de Frias Lopez, S. Larsson and J. Silfwerbrand,
"Discrete element modelling of rockfill railway embankments,"
Granular Matter, vol. 23, no. 3, 2021.
[50]
S. Li, J. Yang and W. Liu,
"Estimation of aerator air demand by an embedded multi‐gene genetic programming,"
Journal of Hydroinformatics, vol. 23, no. 5, pp. 1000-1013, 2021.