Conference Paper
Conference Paper
[1]
N. Minbashi, M. Bohlin and B. Kordnejad,
"Analysis of Railyard Congestion and Departure Delay Relationship: a Case Study from Swedish Railways,"
in hEART 2020 : 9th Symposium of the European Association for Research in Transportation, Lyon, France, 2021.
[2]
P. Sadeghian, C. Wang and S. Sadrizadeh,
"The impact of heat loads on the performance of the unidirectional airflow ventilation system in an operating room,"
in Indoor Air Quality (IAQ) Conference 2021, Athens,Greece, 2021.
[3]
N. Minbashi, M. Bohlin and B. Kordnejad,
"A departure delay estimation model for freight trains,"
in Proceedings of TRA2020, the 8th Transport Research Arena 2020: Rethinking transport – towards clean and inclusive mobility, 2020.
[4]
C. Shan,
"Artificial intelligence-based models to predict the spatial bedrock levels for geoengineering application,"
in 3rd conference of the Arabian Journal of Geosciences (CAJG), 2020.
[5]
T. Widström,
"Damage risk assessment in historic buildings using equivalent wall-parts,"
in 12th Nordic symposium on building physics (NSB 2020), 2020.
[6]
D. Leffler et al.,
"Distribution of passenger costs in fixed versus flexible station-based feeder services,"
in Transportation Research Procedia, 2020, pp. 179-186.
[7]
A. Ansell, E. Nordström and L. Strömberg,
"Durability of shotcrete tunnel linings due to steel fibre corrosion in cracks,"
in ITA-AITES World Tunnel Congress, WTC2020 and 46th General Assembly Kuala Lumpur Convention Centre, Malaysia 15-21 May 2020, 2020, pp. 1125-1130.
[8]
F. Björk et al.,
"Electroosmosis - a method applied for handling of moisture in foundations,"
in 12th Nordic symposium on building physics (NSB 2020), 2020.
[9]
P. Sadeghian et al.,
"Evaluating the cooling capacity of diffuse ceiling ventilation systems for different ratios of perforated area,"
in 16th Conference of the International Society of Indoor Air Quality & Climate 2020, Seoul, South Korea, 2020.
[10]
H. Badia and E. Jenelius,
"Feeder Transit Services in Different Development Stages of Automated Buses : Comparing Fixed Routes versus Door-to-Door Trips,"
in Transportation Research Procedia, 2020, pp. 521-528.
[11]
P. Sadeghian, M. C. Lind and S. Sadrizadeh,
"Impact of the surgical lamp design on the airflow and contamination level in an operating room : a numerical assessment,"
in 16th Conference of the International Society of Indoor Air Quality & Climate 2020, Seoul, South Korea, 2020.
[12]
A. Badura, B. Mueller and I. Martinac,
"Managing climate-change-induced overheating in non-residential buildings,"
in 12th Nordic symposium on building physics (NSB 2020), 2020.
[13]
Y. Wang et al.,
"Numerical investigations on an innovative timber-steel hybrid system,"
in Proceedings of the 16th Annual Meeting of the Northern European Network for Wood Science and Engineering – WSE2020, 2020, pp. 92-94.
[14]
T. Wang et al.,
"Prediction of the tensile strength of birch plywood at varying angles to grain,"
in Proceedings of the 16th Annual Meeting of the Northern European Network for Wood Science and Engineering - WSE2020, 2020, pp. 80-82.
[15]
J. Johansson et al.,
"Reducing impact of vibrations from compaction on slope stability,"
in Eurodyn2020, 2020.
[16]
R. Allahvirdizadeh, A. Andersson and R. Karoumi,
"Reliability Assessment of the Dynamic Behavior of High-Speed Railway Bridges Using First Order Reliability Method,"
in Proceedings of the 11th International Conference on Structural Dynamics,, 2020, pp. 3438-3450.
[17]
R. Wang, J. Leander and R. Karoumi,
"Risk Analysis for Decision Support --- A Case Study on Fatigue Assessment of a Steel Bridge,"
in 30th European Safety and Reliability Conference and 15th Probabilistic Safety Assessment and Management Conference (ESREL2020 PSAM15), 2020.
[18]
V. Belloni et al.,
"TACK PROJECT: TUNNEL AND BRIDGE AUTOMATIC CRACK MONITORING USING DEEP LEARNING AND PHOTOGRAMMETRY,"
in The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, 2020.
[19]
M. Cebecauer et al.,
"3D Speed Maps and Mean Observations Vectors for Short-Term Urban Traffic Prediction,"
in TRB Annual Meeting Online, 2019, pp. 1-20.
[20]
L. Possidente, N. Tondini and J.-M. Battini,
"A 3D beam element to study torsion of steel open sections exposed to fire,"
in Advances in Engineering Materials, Structures and Systems : Innovations, Mechanics and Applications, 2019, pp. 561-565.
[21]
J. Leander and O. Skoglund,
"A calibrated verification model for fatigue assessment of road bridges,"
in Proceeding of Nordic Steel 2019, 2019.
[22]
D. Honfi et al.,
"A practical approach for supporting decisions in bridge condition assessment and monitoring,"
in 20th Congress of IABSE, New York City 2019 : The Evolving Metropolis - Report, 2019, pp. 2137-2142.
[23]
J. Shamu, L. Zou and U. Håkansson,
"An experimental study of 2D radial flow of a yield stress fluid between parallel disks,"
in September 2-3, 2019, Helsinki. Nordic Grouting Symposium 2019, 2019.
[24]
A. C. Neves et al.,
"Application of a model-free ANN approach for SHM of the Old Lidingö Bridge,"
in IABSE Symposium, Guimaraes 2019 : Towards a Resilient Built Environment Risk and Asset Management - Report, 2019, pp. 200-211.
[25]
R. Malm et al.,
"Assessing the structural safety of cracked concrete dams subjectedto harsh environment,"
in Sustainable and Safe Dams Around the World, 2019, pp. 383-397.
[26]
J. Warg, A. Ait-Ali and J. Eliasson,
"Assessment of Commuter Train Timetables Including Transfers,"
in 21st EURO Working Group on Transportation Meeting, EWGT 2018, 17th – 19th September 2018, Braunschweig, Germany, 2019, pp. 11-18.
[27]
D. Eriksson, R. Malm and R. Hellgren,
"Assessment of frost damage in hydraulic structures using a hygro-thermo-mechanical multiphase model,"
in Sustainable and Safe Dams Around the World, 2019, pp. 332-346.
[28]
P. Rogers et al.,
"Bulk Hydrophobic Civil Engineering Concrete for Nordic Conditions : Freeze Thaw Action,"
in fib Symposium 2019, Concrete - Innovations in Materials, Design and Structures, May, 27-29, 2019, Krakow, Poland, 2019, pp. 2044-2051.
[29]
L. Zou, U. Håkansson and V. Cvetkovic,
"Cement grout propagation in 2D fracture networks : impact of rheology,"
in 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019, 2019, pp. 2486-2493.
[30]
J. Shamu, L. Zou and U. Håkansson,
"Cementbaserade Injekteringsmedels Reogram : Instabilt Flöde Och Inverkan På Injektering,"
in Proceedings Bergdagarna 2019, 2019.
[31]
L. Zou, U. Håkansson and V. Cvetkovic,
"Characterization of effective transmissivity for cement grout flow in rock fractures,"
in Proceedings of Nordic Grouting Symposium 2019, 2019.
[32]
R. Wang, J. Leander and R. Karoumi,
"Comparison of simulation methods applied to steel bridge reliability evaluations,"
in 13th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP 2019, 2019.
[33]
L. Andersson et al.,
"Continuous Preventive Bridge Maintenance in Sweden – Field Experiment on the Effect of Washing on Concrete Bridges,"
in Proceedings of the fib Symposium 2019: Concrete - Innovations in Materials, Design and Structures, 2019.
[34]
A. C. Neves et al.,
"Cost-based optimization of the performance of a damage detection system,"
in Life-Cycle Analysis and Assessment in Civil Engineering : Towards an Integrated Vision - Proceedings of the 6th International Symposium on Life-Cycle Civil Engineering, IALCCE 2018, 2019, pp. 2103-2112.
[35]
J. Högdahl,
"Delay Prediction with Flexible Train Order in a MILP Simulation-Optimization Approach for Railway Timetabling,"
in RailNorrköping 2019. 8th International Conference on Railway Operations Modelling and Analysis (ICROMA), Norrköping, Sweden, June 17th – 20th, 2019, 2019.
[36]
S. Libby et al.,
"Dynamic fracture network generation : A new method for growing fractures according to their deformation history,"
in 53rd US Rock Mechanics/ Geomechanics Symposium, 2019.
[37]
S. Libby et al.,
"Dynamic fracture network generation : A new method for growing fractures according to their deformation history,"
in 53rd U.S. Rock Mechanics/Geomechanics Symposium, 2019.
[38]
C. Wersäll, F. Åkesson and A. Persson,
"Dynamic roller characteristics and CCC using automatic frequency control,"
in IICTG 2019, Beijing, China, 16-17 April 2019, 2019.
[39]
C. Wang, P. Sadeghian and S. Sadrizadeh,
"Effect of staff number on the bacteria contamination in operating rooms with temperature-controlled airflow ventilation and turbulent mixing ventilation,"
in Proceedings of Building Simulation 2019 : 16th Conference of IBPSA, 2019.
[40]
W. Guo, J. Yang and J. B. Yang,
"Effect of throttling orifice head loss on dynamic behavior of hydro-turbine governing system with air cushion surge chamber,"
in 29th iahr symposium on hydraulic machinery and systems, 2019.
[41]
M. Johari et al.,
"Effects of Near-Side and Far-Side Bus Stops on NMFD of Bi-Modal Urban Network,"
in 2019 IEEE Intelligent Transportation Systems Conference, ITSC 2019, 2019, pp. 746-751.
[42]
D. R. Damasceno et al.,
"Efficiency of subset simulation in the design of lined rock caverns for storage of hydrogen gas,"
in Proceedings of the 13th International Conference on Applications of Statistics and Probability in Civil Engineering, 2019.
[43]
D. R. Damasceno et al.,
"Efficiency of subset simulation in the design of lined rock caverns for storage of hydrogen gas,"
in 13th International Conference on Applications of Statistics and Probability in Civil Engineering, ICASP 2019, 2019.
[44]
G. Kayo, M. Shukuya and I. Martinac,
"Energy and exergy analysis of waste-water heat recovery in a multi-family residential complex,"
in IOP Conference Series : Materials Science and Engineering, 2019.
[45]
N. Al-Ayish et al.,
"Environmental impact of concrete structures reinforced with GFRP bars : A simplified study on columns,"
in Proceedings of the fib Symposium 2019 : Concrete - Innovations in Materials, Design and Structures, 2019, pp. 1998-2005.
[46]
T. Misiek, B. Norlin and T. Höglund,
"Explanatory notes to buckling design of longitudinally welded aluminium compression members,"
in SDSS 2019 - International Colloquium on Stability and Ductility of Steel Structures, 2019.
[47]
T. Misiek, B. G. Norlin and T. Höglund,
"Explanatory notes to buckling design of longitudinally welded aluminium compression members,"
in SDSS 2019 - International Colloquium on Stability and Ductility of Steel Structures, 2019.
[48]
H. Yin et al.,
"Fabrication of superamphiphobic wood surface based on silicone nanofilaments,"
in Proceedings of the 15th annual meeting of the Northern European Network for Wood Science and Engineering, 2019, pp. 135-137.
[49]
J. Silfwerbrand,
"Fibre Concrete Structures – Tests, Design & Applications,"
in 26th Slovenian Colloquium on Concrete, Ljubljana, Slovenia, 2019, pp. 23-36.
[50]
S. Härer et al.,
"Frost reduction in mechanical balanced ventilation by efficient means of preheating cold supply air,"
in IOP Conference Series : Materials Science and Engineering, 2019.