Journal Articles
Journal Articles
[1]
D. O. Potyondy et al.,
"A 3D Subspring Network Breakable Voronoi Model for Rock,"
Rock Mechanics and Rock Engineering, 2025.
[2]
Q. Zhang, Z. Ma and Z. Cui,
"A causality-based explainable AI method for bus delay propagation analysis,"
Communications in Transportation Research, vol. 5, 2025.
[3]
H. Chen, J. Kronqvist and Z. Ma,
"A choice-based optimization approach for service operations in multimodal mobility systems,"
Transportation Research Part C : Emerging Technologies, vol. 171, 2025.
[4]
Y. Elomari et al.,
"A hybrid data-driven Co-simulation approach for enhanced integrations of renewables and thermal storage in building district energy systems,"
Journal of Building Engineering, vol. 104, 2025.
[5]
L. F. Gomez de Alba et al.,
"A sensitivity study and robustness evaluation of the CWFS and DISL approaches for brittle failure continuum modelling around underground excavations,"
Tunnelling and Underground Space Technology, vol. 161, 2025.
[6]
T. A. Pham, R. Akan and A. Tabaroei,
"A simplified soil–structure interaction model for load–settlement analysis of piles,"
Canadian geotechnical journal (Print), vol. 62, 2025.
[7]
T. K. Yong, Z. Ma and C.-W. Palmqvist,
"AP-GRIP evaluation framework for data-driven train delay prediction models : systematic literature review,"
European Transport Research Review, vol. 17, no. 1, 2025.
[8]
S. Yaqoob and J. Silfwerbrand,
"Assessing the Effectiveness of Dowel Bars in Jointed Plain Concrete Pavements Using Finite Element Modelling,"
Materials, vol. 18, no. 3, 2025.
[9]
Y. Ling et al.,
"Bus driver deceleration behavior modeling at intersections using multi-source on-board sensor data,"
Journal of Public Transportation, vol. 27, 2025.
[10]
J. H. Carvalho Everton and S. Erlingsson,
"Characterising the permanent deformation of subgrade soils under seasonal variation,"
Canadian journal of civil engineering (Print), vol. 52, no. 3, pp. 317-333, 2025.
[11]
J. Everton and S. Erlingsson,
"Characterising the resilient behaviour of unsaturated sandy soils under suction-controlled tests,"
Road Materials and Pavement Design, pp. 1-23, 2025.
[12]
M. A. Khan et al.,
"Charge-on-the-move solutions for future mobility : A review of current and future prospects,"
Transportation Research Interdisciplinary Perspectives, vol. 29, 2025.
[13]
G. Aspetakis and Q. Wang,
"Critical review of Air-Based PVT technology and its integration to building energy systems,"
Energy and Built Environment, vol. 6, no. 1, pp. 121-135, 2025.
[14]
T. A. Pham et al.,
"Critical state mechanics-based arching model for pile-supported embankments,"
Geotextiles and Geomembranes, vol. 53, no. 4, pp. 909-937, 2025.
[15]
L. Wang et al.,
"Data-driven analysis and modeling of individual longitudinal behavior response to fare incentives in public transport,"
Transportation, vol. 52, no. 1, pp. 263-286, 2025.
[16]
Y. Wu et al.,
"Data-driven causal behaviour modelling from trajectory data : A case for fare incentives in public transport,"
Journal of Public Transportation, vol. 27, 2025.
[17]
J. Zhan et al.,
"Deciphering tensile fatigue behavior of UHPFRC using magnetoscopy, DIC and acoustic emission,"
Cement and Concrete Research, vol. 196, 2025.
[18]
A. Tabaroei et al.,
"Deep Excavation–Induced Stability Evaluation of a Triple Tunnel Using Discrete and Continuum Numerical Modeling,"
International Journal of Geomechanics, vol. 25, no. 1, 2025.
[19]
I. Marotta et al.,
"Demonstration of sector-coupling based on advanced Thermal Energy Storage : a Model Predictive Control framework for load-shifting and grid-balancing,"
Journal of Energy Storage, vol. 126, 2025.
[20]
F. Theland et al.,
"Design procedure for estimating the vertical response of end-bearing piles from free field vibrations produced by a nearby surface load,"
Structures, vol. 71, pp. 108063-108063, 2025.
[21]
A. Fonsati and K. Gudmundsson,
"Digital Inventories for Circular Design : Solutions for the Built Environment,"
Sustainability, vol. 17, no. 10, 2025.
[22]
Q. Li et al.,
"Dissolved Oxygen Modeling by a Bayesian-Optimized Explainable Artificial Intelligence Approach,"
Applied Sciences, vol. 15, no. 3, 2025.
[23]
J. Bergenudd, J.-M. Battini and R. Crocetti,
"Dynamic analysis of a pedestrian timber bridge considering the connections and pile foundations,"
Structures, vol. 74, 2025.
[24]
D. Liu et al.,
"Dynamic behavior of steel post/wood panel railway noise barriers under aerodynamic loads induced by high-speed trains,"
Railway Engineering Science, 2025.
[25]
S. Zahedi, H. N. Koutsopoulos and Z. Ma,
"Dynamic interlining in bus operations,"
Transportation, vol. 52, no. 3, pp. 827-850, 2025.
[26]
A. Albright, J.-M. Battini and A. Andersson,
"Dynamic soil-structure interaction of a single-span railway bridge, forced vibration testing and simulation,"
Structure and Infrastructure Engineering, vol. 21, no. 1, pp. 39-48, 2025.
[27]
G. Aspetakis, C. Wang and Q. Wang,
"Enhancing Air-Based PVT Performance : A numerical and experimental assessment of V-Baffle designs,"
Applied Thermal Engineering, vol. 262, 2025.
[28]
A. Shabani, D. Elaguine and M. Partl,
"Evaluating thermal contraction behaviour of basalt mastic using micromechanical finite element modelling,"
Road Materials and Pavement Design, 2025.
[29]
M. Abbasi et al.,
"Experimental and numerical investigation of pressure distribution in human upper airway passage before and after maxillary sinus surgery,"
Respiratory Physiology & Neurobiology, vol. 331, 2025.
[30]
M. Liaghat et al.,
"Experimental and numerical investigations on the impact of two-way interaction assumption in the nasal spray simulations,"
European journal of mechanics. B, Fluids, vol. 113, 2025.
[31]
A. Jansson et al.,
"Experimental investigation on prevalent local failure mechanisms in hard rock tunnel linings using distributed optical fibre sensors,"
Engineering structures, vol. 333, 2025.
[32]
S. Zhang et al.,
"Experimental Study on Erosion and Viscous Fingering of Fresh Cement-Based Grout After Injection Stops,"
Rock Mechanics and Rock Engineering, 2025.
[33]
A. Skoufas et al.,
"Ex-post assessment of public transportation on-board crowding induced by new urban developments,"
Cities, vol. 165, 2025.
[34]
K. Hou et al.,
"Fatigue test and peridynamic simulation of cement-treated recycled aggregate mixture derived from building demolition waste,"
Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), vol. 56, no. 4, pp. 1426-1439, 2025.
[35]
Y. Chen, T. Ohlson Timoudas and Q. Wang,
"Flexibility-centric sizing and optimal operation of building-thermal energy storage systems: A systematic modelling, optimization and validation approach,"
Energy and Buildings, vol. 338, 2025.
[36]
B. Liu et al.,
"How incentives affect commuter willingness for public transport : Analysis of travel mode shift across various cities,"
Travel Behaviour & Society, vol. 39, 2025.
[37]
R. Jia et al.,
"i-CLTP : Integrated contrastive learning with transformer framework for traffic state prediction and network-wide analysis,"
Transportation Research Part C : Emerging Technologies, vol. 171, 2025.
[38]
K. Xiong et al.,
"Insights into the chemical composition and molecular structure of asphalt: guiding material design and performance optimization,"
Fuel, vol. 398, 2025.
[39]
S. Zhang et al.,
"Kinematic responses of pipe piles considering the effects of soil plugs and underlying strata subjected to P-waves,"
Acta Geotechnica, 2025.
[40]
S. Hov et al.,
"Laboratory scale column penetration tests for deep mixing purposes,"
Canadian geotechnical journal (Print), vol. 62, 2025.
[41]
Y. Wang et al.,
"Leakage identification and correlation coefficient method for industrial workshop production process combining with computational fluid dynamics,"
Indoor + Built Environment, vol. 34, no. 1, pp. 192-209, 2025.
[42]
A. G. Corkum, B. Jeans and D. Mas Ivars,
"Leeb hardness test as a tool for joint wall compressive strength (JCS) evaluation,"
Engineering Geology, vol. 344, 2025.
[43]
Z. Qin et al.,
"LingoTrip : Spatiotemporal context prompt driven large language model for individual trip prediction,"
Journal of Public Transportation, vol. 27, 2025.
[44]
F. Karlsson et al.,
"Measurements and predictions of vibration response of end-bearing pile group in soft clay due to vertical ground surface load,"
Engineering structures, vol. 331, 2025.
[45]
A. Aloisio et al.,
"Mechanical performance of pure-wood moment-resisting ridge joints with plywood gussets and wooden dowels,"
Engineering structures, vol. 334, 2025.
[46]
W. Gan et al.,
"Mesoscopic modeling the interaction of two attached-wall cavitation bubbles,"
Ultrasonics sonochemistry, vol. 117, 2025.
[47]
J. Maljaars et al.,
"Models and methods for probabilistic safety assessment of steel structures subject to fatigue,"
Structural Safety, vol. 113, 2025.
[48]
M. Monfared et al.,
"Morphometric variation in central airways of ten different human lung,"
Biomedical Engineering & Physics Express, vol. 11, no. 2, 2025.
[49]
M. Wang et al.,
"Novel vibratory compaction quality indices developed from particle migration and distribution characteristics for unbound aggregate materials,"
Case Studies in Construction Materials, vol. 22, 2025.
[50]
L. Crusat et al.,
"Numerical modeling of rock spalling around a tunnel using visco-plastic interface elements and a rock removal strategy,"
International Journal of Rock Mechanics And Mining Sciences, vol. 191, 2025.