Skip to main content
To KTH's start page

Student Thesis

Student thesis

[1]
K. Marntell, "An Experimental Investigation of Minimum Block Size for Pipe Spiling in Highly Fractured Rock Masses," , 2026.
[2]
A. Mohamed Ibrahim and S. Saleh, "Analysis of vortex-induced vibrations in slender steel structures using CFD and analytical methods," , 2026.
[3]
K. Mambo, "Assessment of the scale of fluctuation in rock masses : A case study of the Sofia Station," , 2026.
[4]
Ö. Kayhan, "Automated seismic design and resilience analysis of buildings : A comparison between lateral force resisting systems," , 2026.
[5]
B. Hemin, "Comparative Energy and Economic Evaluation of Airflow Control Strategies in Chilled Beam Ventilation Systems : A case study on Performance of Constant Air Volume (CAV), Variable Air Volume (VAV), and Demand-Controlled Ventilation (DCV) Strategies in Swedish Meeting Rooms," , 2026.
[6]
N. Kifle, "Comparison of Linear Response Spectrum and Nonlinear Pushover Analysis for seismic assessment of reinforced concrete shear-wall structures," , 2026.
[7]
T. Egloff, "Conception of post-tensioned stone bridges," , 2026.
[8]
H. Attari, "Design of reinforced concrete slabs : Python-based automation of reinforcement design and layout," , 2026.
[9]
R. M. Hassan and S. Ahmed, "Effect of foundation geometry and dam length on the stability of concrete buttress dams," , 2026.
[10]
S. Ansari, "Embodied and Operational Carbon in District Heating Substation and Ground Source Heat Pump Systems : A Comparative Life Cycle Assessment of Two Heating System Solutions," , 2026.
[11]
A. Bukhari and S. A. Shimu, "Enablers and Barriers to Reuse in the Construction Industry : A Thematic Literature Review Supported by Case Studies," , 2026.
[12]
A.-K. Seiwert, "Environmental Sustainability and Transport Infrastructure Risk Management : How do environmental sustainability requirements influence risks and uncertainties, risk-management practices, and decision-making in transport infrastructure projects during the planning, design, and construction phases?," , 2026.
[13]
S. Boterf, "Evaluation of the load-bearing capacity of mortise-and-tenon joints in large prefabricated reinforced concrete elements," , 2026.
[14]
Y. Bao, "Experimental Evaluation of Birch Rod Reinforcement for Improving Compression Strength Perpendicular to the Grain : Within the Context of Stress Laminated Timber (SLT) Decks," , 2026.
[15]
E. Servetti, "Fish habitat suitability in a hydropower-regulated river reach : An ecohydraulic study of brown trout (Salmo trutta) and European grayling (Thymallus thymallus)," , 2026.
[16]
P. C. Staroste, "Heading for Gold : Exploring Renovation Strategies Toward Miljöbyggnad Certification for an Office Building in Stockholm," , 2026.
[17]
A. K. W. WELIGAMAGE, "Improvement of Building Operation and Performance in KTH's "Undervisningshuset” : Enhancing Interaction Between Users and the Building," , 2026.
[18]
H. Albaldawi, "Influence of elastic lateral bracing on lateral torsional buckling : Analytical and parametric studies," , 2026.
[19]
P. Garcia Diaz, "Life cycle assessment of a single span bridge : Study of the Bryngeån Bridge and four steel girder alternatives," , 2026.
[20]
I. Coucher and L. Sihlén, "Mechanical characterization of wooden dowels with emphasis on shear strength : An experimental study on birch and beech dowels," , 2026.
[21]
A. Nordström, "Mechanical properties of ice and their implications for concrete dam ice load events," , 2026.
[22]
J.-P. Vincensini, "Methodology for Analyzing Structural Response to Blast-Type Rapid Dynamic Loading Using SOFiSTiK," , 2026.
[23]
V. Hò and C. Tong, "NLFEA of Tests on Pile Caps Loaded to Shear Failure : Calibration and Parametric Studies," , 2026.
[24]
M. Sandström, "Optimised design of slender reinforced concrete columns subjected to compression and biaxial bending : A comparison between Eurocode 2 and Numerical analysis," , 2026.
[25]
G. Törnqvist and M. Hammarström, "Preservative-treated plywood : Effects on mechanical properties, preservative uptake and dimensional stability," , 2026.
[26]
R. Soulas, "Raw Earth as a building material from an LCA point of view," , 2026.
[27]
B. Samusch, "Remaining service life assessment of a reinforced concrete quay structure," , 2026.
[28]
X. Zhang, "Size effect on the bonding strength between spruce glulam and birch plywood," , 2026.
[29]
I. Hesselgren and S. Tecle, "Statistical and spatial distribution of ice loads and sliding failures of concrete buttress dams," , 2026.
[30]
M. Pilfalk, "The Correlation Between the Effective Stress State and Friction Angle in Saturated Fill : A Statistical Analysis of Field-Evaluated Friction Angles Comparedto Swedish Design Standards," , 2026.
[31]
R. Yang, "The Ontology for Facilities Management," , 2026.
[32]
A. BIN KAMARUDIN, "Analysing Energy Consumption Patterns of Electric Buses in Stockholm : Establishing a Data-Driven Framework to Analyse Energy Consumption Patterns based on the Operational Phases of Electric Buses in Stockholm," , 2025.
[33]
N. Haidi, "Assessment and Optimization of Indoor Climate in an Office Building: Balancing Comfort and Energy Efficiency," , 2025.
[34]
O. A. Carlsson and F. Svärdström, "Automated design for isolated foundations : Development of a Parametric Application using Eurocode, Tekla Open API and C#," , 2025.
[35]
S. Malva, "Automating sustainability assessment for buildings during the design phase : a study of integrating BIM with web-based data," , 2025.
[36]
A. Janjic and I. Wernsten, "Characterization of explosion pressure waves behind embankments," , 2025.
[37]
A. Blomberg and J. Fernström, "Combined Cracking in Concrete : A Study About the Combination of Restrained Shrinkage and Flexural Cracking," , 2025.
[38]
M. Isaksson and E. Johansson Hälleström, "Combining Technical and Organisational Insights to Promote Reuse of Structural Concrete," , 2025.
[39]
C. M. Kemgne, "Comparison and evaluation of pricing systems for formal and informal public transport in African metropolises," , 2025.
[40]
B. Dennis, "Computational modeling of optimized piano key weirs for enhanced flood discharge," , 2025.
[41]
W. Barhebréus and Y. Youssef, "Design of Column Pad Concrete Foundations Subjected to Uniform Pressure," , 2025.
[42]
A. Bengtsson and O. Nexén, "Dynamic analysis of portal frame bridges for high-speed railway traffic," , 2025.
[43]
J. E. CLAVIJO REYES, "Estimating AADT from Cellular Network-Derived OD Data Using Neural Networks : A Case Study of Linköping," , 2025.
[44]
Y. A. Widyasena, "Estimating Link-Level Cycling Volumes Using Crowdsourced Data : An Application of CatBoost and SHAP in Lund Municipality," , 2025.
[45]
T. Jasek, "Evaluation of Representative Groundwater Pressure according to Eurocode 7," , 2025.
[46]
H. Taha, "Evaluation of the Eurocode Interaction Formula for Lateral-Torsional Buckling of Rectangular Timber Sections," , 2025.
[47]
K. S. Sverrisdóttir, "Evaluation of Ventilation Configurations for Icelandic Conditions," , 2025.
[48]
B. A. Alcota Baudoin, "Generative structural design for rapid embodied carbon evaluation," , 2025.
[49]
M. Åkerblom, "Hygro-Mechanical Simulations of Massive Concrete Structures," , 2025.
[50]
E. A. Yaghoot, "Identifying the Relationship Between Indoor Environmental Quality and Remote Work Productivity : A Holistic Approach on Providing a Linkage between Occupant Response & Behavior and IEQ," , 2025.
Full list in the KTH publications portal
Page responsible:admin@byv.kth.se
Belongs to: Department of Civil and Architectural Engineering
Last changed: Feb 24, 2022