Tidskrifter

Tidskrifter

[1]
L. Possidente, N. Tondini och J. M. Battini, "3D Beam Element for the Analysis of Torsional Problems of Steel-Structures in Fire," Journal of Structural Engineering, vol. 146, no. 7, 2020.
[2]
[3]
J. W. Joubert et al., "A matching algorithm to study the evolution of logistics facilities extracted from GPS traces," Transportation Research Procedia, vol. 46, no. 2020, s. 237-244, 2020.
[4]
H. Fadil, D. Jelagin och M. N. Partl, "A New Viscoelastic Micromechanical Model for Bitumen-Filler Mastic," Construction and Building Materials, vol. 253, 2020.
[5]
J. Larsson och M. Flansbjer, "An Approach to Compensate for the Influence of the System Normal Stiffness in CNS Direct Shear Tests," Rock Mechanics and Rock Engineering, vol. 53, no. 5, s. 2185-2199, 2020.
[7]
F. Vautard, C. Liu och O. Fröidh, "Assessing economic welfare for departure time shifts in interregional rail timetables," Transportation Research Part A : Policy and Practice, 2020.
[8]
L. Zou, U. Håkansson och V. Cvetkovic, "Cement grout propagation in 2D fracture networks : Impact of rheology," 14th International Congress on Rock Mechanics and Rock Engineering, ISRM 2019, s. 2486-2493, 2020.
[9]
H. Lindblad och J. R. Guerrero, "Client’s role in promoting BIM implementation and innovation in construction," Construction Management and Economics, 2020.
[10]
H. Badia, "Comparison of Bus Network Structures in Face of Urban Dispersion for a Ring-Radial City," Networks and Spatial Economics, vol. 20, no. 1, s. 233-271, 2020.
[11]
S. Peftitsi, E. Jenelius och O. Cats, "Determinants of passengers' metro car choice revealed through automated data sources : a Stockholm case study," Transportmetrica A : Transport Science, vol. 16, no. 3, s. 529-549, 2020.
[12]
A. Draganovic et al., "Dispersion of microfine cement grout with ultrasound and conventional laboratory dissolvers," Construction and Building Materials, vol. 251, 2020.
[13]
G. Larsson et al., "Duration of load behaviour of a glued shear plate dowel joint," European Journal of Wood and Wood Products, vol. 78, no. 1, s. 5-15, 2020.
[15]
S. Källbom et al., "Effects of water soaking-drying cycles on thermally modified spruce wood-plastic composites," Wood and Fiber Science, vol. 52, no. 1, s. 2-12, 2020.
[18]
T. Vieira, J. Lundberg och O. Eriksson, "Evaluation ofuncertainty on Shore hardness measurements of tyre treads and implications totyre/road noise measurements with the Close Proximity method," Measurement - Journal of the International Measurement Confederation (IMEKO), 2020.
[21]
Y. Chen et al., "Flow Expansion and Deflection Downstream of a Symmetric Multi-gate Sluice Structure," KSCE Journal of Civil Engineering, vol. 24, no. 2, s. 471-482, 2020.
[22]
K. R. Massarsch, C. Wersäll och B. H. Fellenius, "Horizontal stress increase induced by deep vibratory compaction," Proceedings of the Institution of Civil Engeneers : Geotechnical Engineering, vol. 173, no. 3, s. 228-253, 2020.
[24]
J. Ekblad et al., "Impact on rutting from introduction of increased axle loads in Finland," The international journal of pavement engineering, 2020.
[25]
W. Bjureland et al., "Influence of spatially varying thickness on load-bearing capacity of shotcrete," Tunnelling and Underground Space Technology, vol. 98, 2020.
[26]
I. Rubensson, Y. Susilo och O. Cats, "Is flat fare fair? : Equity impact of fare scheme change," Transport Policy, vol. 91, s. 48-58, 2020.
[27]
O. Cats och J. West, "Learning and adaptation in dynamic transit assignment models for congested networks," Transportation Research Record, vol. 2674, no. 1, s. 113-124, 2020.
[28]
R. Malm, R. Hellgren och J. Enzell, "Lessons Learned Regarding Cracking of a Concrete Arch Dam Due to Seasonal Temperature Variations," Infrastructures, vol. 5, no. 2, 2020.
[29]
R. Hellgren et al., "Measurement of ice pressure on a concrete dam with a prototype ice load panel," Cold Regions Science and Technology, vol. 170, 2020.
[30]
A. Ruffels, I. Gonzalez och R. Karoumi, "Model-free damage detection of a laboratory bridge using artificial neural networks," Journal of Civil Structural Health Monitoring, vol. 10, no. 2, s. 183-195, 2020.
[31]
[32]
S. Li, J. Yang och Q. Li, "Numerical Modelling of Air-Water Flows over a Stepped Spillway with Chamfers and Cavity Blockages," KSCE Journal of Civil Engineering, vol. 24, no. 1, s. 99-109, 2020.
[33]
A. Ait Ali, J. Warg och J. Eliasson, "Pricing commercial train path requests based on societal costs," Transportation Research Part A : Policy and Practice, vol. 132, s. 452-464, 2020.
[34]
J. Spross et al., "Principles of risk‑based rock engineering design," Rock Mechanics and Rock Engineering, vol. 53, s. 1129-1143, 2020.
[35]
R. Hellgren, R. Malm och A. Ansell, "Progressive Failure Analysis of a Concrete Dam Anchored with Passive Rock Bolts," Infrastructures, vol. 5, no. 3, 2020.
[37]
T. Vieira, U. Sandberg och S. Erlingsson, "Rolling resistance evaluation of winter tyres on in-service road surfaces," Tire Science and Technology, 2020.
[38]
L. Engelson och M. Fosgerau, "Scheduling preferences and the value of travel time information," Transportation Research Part B : Methodological, vol. 134, s. 256-265, 2020.
[39]
B. Shi et al., "Short- and long-term performance of bonding steel-plate joints for timber structures," Construction and Building Materials, vol. 240, 2020.
[40]
L. Possidente, N. Tondini och J.-M. Battini, "Torsional and flexural-torsional buckling of compressed steel members in fire," Journal of constructional steel research, vol. 171, 2020.
[41]
F. Chen, D. Elaguine och M. N. Partl, "Vibration-induced aggregate segregation in asphalt mixtures," Materials and Structures, vol. 53, no. 2, 2020.
[42]
L. Zou, U. Håkansson och V. Cvetkovic, "Yield-power-law fluid propagation in water-saturated fracture networks with application to rock grouting," Tunnelling and Underground Space Technology, vol. 95, 2020.
[43]
J. Högdahl, M. Bohlin och O. Fröidh, "A combined simulation-optimization approach for minimizing travel time and delays in railway timetables," Transportation Research Part B : Methodological, vol. 126, s. 192-212, 2019.
[45]
E. Olsson och D. Jelagin, "A contact model for the normal force between viscoelastic particles in discrete element simulations," Powder Technology, vol. 342, s. 985-991, 2019.
[46]
R. de Frias Lopez, S. Larsson och J. Silfwerbrand, "A discrete element material model including particle degradation suitable for rockfill embankments," Computers and geotechnics, vol. 115, 2019.
[47]
A. Ploskic, Q. Wang och S. Sadrizadeh, "A holistic performance evaluation of ventilation radiators – An assessment according to EN 442-2 using numerical simulations," Journal of Building Engineering, vol. 25, 2019.
[48]
D. Eriksson, T. Gasch och A. Ansell, "A Hygro-Thermo-Mechanical Multiphase Model for Long-Term Water Absorption into Air-Entrained Concrete," Transport in Porous Media, vol. 127, no. 1, s. 113-141, 2019.
[49]
T. Misiek, B. Norlin och T. Höglund, "A look at European buckling curves for aluminium members," Steel Construction, 2019.
[50]
L. Lövqvist, R. Balieu och N. Kringos, "A micromechanical model of freeze-thaw damage in asphalt mixtures," The international journal of pavement engineering, 2019.
Fullständig lista i KTH:s publikationsportal
Innehållsansvarig:webmaster@byv.kth.se
Tillhör: Institutionen för byggvetenskap
Senast ändrad: 2017-10-02